Camera Support
Get your reverse or auxiliary camera working properly: wiring, formats (AHD/CVBS) and multi-camera setups. Start with the troubleshooting guides if you've got no picture or the wrong one. If you're on an MK4 headunit, see Headunits → Cameras.
Troubleshooting
4 articles- Black Screen, Rolling Lines, or Wrong Picture on Reversing Check the format, cables and adapter before you swap the camera.
- No Reverse Image or Camera Never Switches Get your camera switching again: trigger wiring, input priority and relay path.
- Flicker, Interference, or Image Cuts in and Out Track down ground loops, alternator noise and unshielded long runs.
- Camera Dead - No LED / No Power at the Camera Check tap points, fuses and 12 V under load at the tailgate.
Choosing & Specs
2 articlesWiring & Signals
3 articles- Reverse Trigger Wiring That Actually Works Compare gear signal and tail-lamp taps, filtered outputs and common Toyota paths.
- Coax Extensions, Shielding, and Connector Care Keep runs neat, grounded properly and sealed against dust and mud.
- Head Unit Wiring Diagram: Every Pin, Plug and Wire Colour See all seven connectors by wire colour and pin number, plus a PDF you can print.
Front & Multi-Camera
2 articlesCare & Maintenance
1 articleNothing here matches that search. Try a different word, or start a support ticket below and we will point you to the right guide.
Need More Help?
Start a Support Request
Attach photos and your order number, and you get a reference number straight away.
Check an Existing Ticket
Sign in with the email you contacted us from and read the whole ticket.
Track Your Order
Every item on your order, line by line, with tracking as soon as a parcel is sent.