MK4 9 inch and 12.1 inch for the LandCruiser 70 Series
- MK4
- MK4 9 inch
- MK4 12.1 inch
| Plug in here | Connector 3 on the MK4 harness is the plug for the steering wheel controls and the factory camera. The two key lines are pins 6 and 7, orange and orange with a black stripe. |
|---|---|
| PVS part | The Android version of the PVS wireless module. It hands the buttons to the headunit on the Key 1 and Key 2 wires, and you map each one in the headunit's steering wheel app. |
| Setting | SWC app |
- Check Connector 3 is fully plugged in.
- Open the SWC app.
- Tap the function on the screen, then press the matching steering wheel button once.
- Work through every button, then press Save.
- Turn the unit off and on, then try every button before the fascia goes back on.
- On a 2023 or later 70 Series the factory wheel plugs straight in through Connector 3, with no module.
- With a PVS steering wheel kit on a pre-2023 70 Series, choose the Android / PVS / Polaris / Aerpro option. The receiver comes paired, so leave the button on it alone.
- Only hold a button when you're adding a long press second function.
From the PVS install documents.
