Grille
Jimny
Direct-fit front grille for Jimny JB74 / JC74 with a 45 degree downward intake structure and a separate inlaid URNIETA emblem, sharpening the OEM neutral face while keeping the factory mounting points.
Why this part
exists.
Direct-fit front grille for Jimny JB74 / JC74 with a 45 degree downward intake structure and a separate inlaid URNIETA emblem, sharpening the OEM neutral face while keeping the factory mounting points.
The OEM grille balances pedestrian zones, airflow, lighting fit-out, and a neutral global-market face. In a stock Jimny that neutrality works. In a Salado build, where the bumper, bonnet, and side bars sharpen the vehicle, the OEM grille becomes the part that softens the front-end language.
The Salado Grille resolves that mismatch through surface direction rather than ornament. Its 45 degree downward intake geometry borrows from URNIETA's NorthSea design language and gives the front face a more committed stance. The URNIETA emblem is treated as an inlaid dimensional component, not a printed mark, so the grille reads as one integrated structure. It keeps OEM mounting points and avoids body modification.
The drawing.
Three things that matter.
45 Degree Intake Geometry
A downward-angled intake structure replaces the OEM mesh, drawn from URNIETA's NorthSea design language. Functional airflow geometry, not decorative.
Dimensional Emblem
The URNIETA emblem is a separate inlaid component, not a stamped or printed logo. Three-dimensional, replaceable, deliberate.
Integrated Body-Flow
The grille reads as one continuous surface with the body line. No gaps, no protrusions. The kind of fit that comes from designing the part with the kit, not separately.
Vehicle fitment.
Installation overview.
Prepare Vehicle
Inspect mounting points, remove required trim, and confirm all supplied parts before installation.
Initial checkTest Fit Product
Position the part, confirm clearances, and verify alignment before final tightening.
Fitment checkSecure Hardware
Install supplied hardware to specification and recheck torque after initial use.
Final torqueFinal Inspection
Confirm panel gaps, hardware access, and surrounding component clearance before releasing the vehicle.
Quality check