Carbon Bonnet Kit
Dry carbon bonnet for the 2023+ 70 Series
The 2023 facelift 70 Series sits differently around the grille, and this bonnet is patterned to that new line. Hand-laid from full carbon in the Urnieta workshop, it fits the 2023 onward (facelift) 70 Series LandCruiser with no body modification needed.
Item code: URNIETA012
In high demand. We're working through a backlog of orders on this range, so this item may dispatch one to two weeks later than usual.
12-Month Australian Warranty.Backed by PVS Automotive, Sydney based support. Tax Deductible for Business. GST claimable if you are registered.Often fully deductible as a business expense. Check with your accountant.
Australian Owned and Operated.Australian Owned Certified · AO 08314
Less weight up front.
The factory 70 Series bonnet is heavy-gauge steel sitting forward of the front axle. The Urnieta kit replaces it with a single-piece dry carbon panel at a fraction of the weight.
It's laid up by hand from prepreg carbon in a tooled mould, vacuum-bagged and autoclave-cured at 6 bar, with a clear finish over the visible weave. It bolts to the OEM hinges and takes the OEM latch and factory bonnet prop.
What you get.
DRY CARBON, AUTOCLAVE-CURED
Prepreg dry carbon laid up by hand in a tooled mould and cured under 6 bar of pressure in an autoclave.
VENTED FOR ENGINE BAY HEAT
Functional vents sit over the hottest zones of the engine bay and release rising hot air.
NO BODY MODIFICATION
Bolts to the OEM hinges and takes the OEM latch and factory bonnet prop.
Vehicle fitment.
Installation overview.
REMOVE FACTORY BONNET
Remove the original bonnet and check the supplied parts.
MOUNT AND ADJUST
Fit the carbon bonnet using its built-in adjustment screws, leaving the lock off, then set even left and right panel gaps.
SET THE LOCK
Adjust the lock tongue length, fit the lock body bracket and tighten all hardware to spec.
Spec it
your way.
Not sure which setup suits your build? Get fitment advice, install guides, or talk to the PVS team before you buy. We are Sydney based and here to help.
