RGB Bi-LED Headlights App-controlled projector upgrade, 70 Series 2023+
A direct-fit Bi-LED projector headlight for the 2023+ LandCruiser 70 Series, with app-controlled RGB styling built into the housing. Sharper beam, cleaner DRL, and full colour control from your phone over Bluetooth.
or 4 interest-free payments of $324.75 with Shop Pay & Afterpay
Item code: LC70-FL-HL
Australian Owned and Operated.Australian Owned Certified · AO 08314
More light, more personality.
The 2023+ LandCruiser 70 Series got a new front end, and these headlights were designed specifically for it. They plug straight into the factory wiring, sit on the factory mounting points, and need no cutting or body modifications. The result is a clean, factory-quality install that takes 30 to 60 minutes per pair with hand tools.
The driving side of things is handled by a Bi-LED projector running a sharp, white low and high beam. The DRL signature stays white. The styling features, a RGB Demon Eye in the projector barrel and an RGB accent ring inside the housing, are dialled in through a Bluetooth app on your phone. Pick a static colour, run a preset mode, or switch the RGB off entirely and run them as straight Bi-LED projectors.
Sealed housings, UV-stable lenses and vibration-dampened internal mounts keep everything in order whether you are on the highway, on tour, or covering rough ground. Backed by a 12-month warranty and local Australian phone support.
Everything in the one housing.
BI-LED PROJECTOR BEAM
Dedicated Bi-LED projector handles both low and high beam, producing a sharper, whiter output than the factory halogen or LED reflector units.
WHITE DRL SIGNATURE
A clean white daytime running light signature runs continuously with the ignition. It stays white regardless of what RGB mode is selected.
RGB DEMON EYE
An RGB ring sits inside the projector barrel. Set any colour or cycle through preset modes from the Bluetooth app. The driving beam is not affected.
Vehicle fitment.
Installation overview.
REMOVE FACTORY UNITS
Disconnect the factory wiring connector and remove the OEM headlight from the factory mounting points.
FIT THE NEW HEADLIGHT
Seat the replacement unit onto the factory mounting points and secure using the original hardware.
CONNECT THE FACTORY PLUG
Plug the factory wiring connector directly into the new headlight. No adapter or relay kit is required.
PAIR THE APP
Download the companion app on iOS or Android, pair over Bluetooth, and configure your preferred RGB colours or modes.