






Electric Side Mirrors 70 Series LandCruiser retrofit kit
Bring electric mirror adjustment to your 70 Series LandCruiser with an OEM-style electric mirror unit and a purpose-built plug-and-play wiring harness. Available in standard and heated variants, this kit fits all 70 Series models from 1984 onwards.
or 4 interest-free payments of $212.25 with Shop Pay & Afterpay
Item code: MIR-LC70-AUTO
Why upgrade your mirrors.
The 70 Series has been in production for over four decades, and a huge number of them still wear the original manual mirrors from the day they rolled off the line. Manual mirrors are a minor frustration on a short commute. On a long touring trip, across highways and corrugated tracks, they become a real problem.
This kit was developed around an OEM-style electric mirror unit, designed and manufactured in Japan, so the fit, finish and glass quality are exactly what you would expect from a factory-spec part. The PVS Automotive wiring harness uses original Toyota-style plugs at the mirror end, so there is no wire splicing there. This is still a genuine wiring installation, not a plug-in accessory: fitting it involves drilling a cable path through the door, wiring power from the cigarette lighter, and installing the supplied switch on the dashboard, so we recommend a qualified auto electrician or installer for the job.
With a heated variant available, you can also address fogging and frost in cooler climates or high-altitude conditions. Whether you are running a 76 Series Wagon daily or a 79 Series Dual Cab on extended trips, this is a clean, permanent upgrade that looks and operates like it came from the factory.
What's in the kit.
OEM-STYLE ELECTRIC MIRRORS
Left-hand and right-hand mirror units designed and manufactured in Japan for OEM fit, finish and glass quality.
WIRING HARNESS INCLUDED
Purpose-built harness using original Toyota-style connectors at the mirror end, so there is no wire splicing there. Fitting it is still a real wiring job: a cable path is drilled through the door and routed to the factory loom.
HEATED VARIANT AVAILABLE
The heated option adds mirror element heating, helping clear fogging and frost in cold or high-altitude conditions.
Vehicle fitment.
How it wires in.
REMOVE EXISTING MIRRORS
Unclip and remove the factory manual mirrors from both factory door mounts.
DRILL AND ROUTE THE HARNESS
A hole is drilled in the door behind the mirror to pass the cable through. The PVS wiring harness is then fed through the door and connected into the factory door loom using OEM Toyota-style plugs, so no splicing is needed at that connection.
FIT MIRROR UNITS & RUN POWER
Mount the electric mirror units to the factory door positions on both sides. Power for the kit is taken from the vehicle's cigarette lighter socket.
INSTALL CONTROL SWITCH
Fit the included mirror control switch to the right-hand side of the dashboard and connect via the harness. Test adjustment and, if applicable, mirror heating before completing fitment.