Winch Power Switch LED dash control
A factory-style replacement blank that gives your winch a clean, labelled, LED-backlit switch on the dash. Choose the fitment for your dash and it drops straight in.
or 4 interest-free payments of $3.74 with Shop Pay & Afterpay
Item code: SW70-VW-WNP
Australian Owned and Operated.Australian Owned Certified · AO 08314
One switch, your
function.
The PVS Automotive Winch Power LED Push Switch fills a factory dash blank with a clean, labelled control for your winch. It is LED backlit, wires into your dash lighting so it dims with the dash at night, and is shaped to suit your exact dash.
Generic rocker switches look like an afterthought. They sit proud of the dash, the labels fade, and the backlight never matches the factory globes. This switch is built to read as if Toyota fitted it: the correct blank shape for your dash, an etched WINCH legend, and a backlight tuned to the factory dimmer circuit.
Choose the fitment that matches your dash and it drops into the existing blank with no cutting and no modification.
Three things that matter.
FACTORY-MATCHED BACKLIGHT
The LED ties into your dash lighting circuit, so the WINCH legend lights with the rest of your dash and dims on the factory dimmer. No mismatched glow, no always-on glare at night.
OEM-STYLE BLANK FIT
Shaped to the exact blank in your dash. It seats flush, clips in like the factory item, and needs no cutting or filing. Remove it and the dash is untouched.
CLEARLY LABELLED CONTROL
An etched WINCH legend leaves no doubt which circuit you are switching. Rated for the load and built to take daily use in a working truck.
Choose your dash.
Installation overview.
REMOVE THE BLANK
Pop out the factory blank from the dash position you want to use. It releases with light pressure from behind or with a trim tool from the front.
WIRE THE SWITCH
Connect the switched output to your winch circuit and the LED to your dash lighting feed so it dims with the dash. Use the supplied terminals.
CLICK IT IN
Seat the switch into the blank opening until it clips home. Test the function and the backlight, then refit any trim you removed.