Slim Line Weather Shields
Toyota LandCruiser 76 & 79 Series
Purpose-built weather shields for the Toyota LandCruiser 76 and 79 Series, letting fresh air in while keeping rain, wind and glare where they belong. At 2.3mm thick, these are built tougher than the standard 1.5mm alternatives on the market.
Item code: WS-LC76-79
Dispatched tomorrow from our Sydney warehouse
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Why thickness actually matters.
Most weather shields on the market are moulded at 1.5mm. That is thin enough to flex under highway wind load, crack in cold mornings and degrade quickly under the Australian sun. PVS Automotive shields are moulded at 2.3mm, giving you a noticeably stiffer, more rattle-free result that holds its shape across years of outback corrugations and coastal humidity.
The slim profile is designed to follow the roofline and door frame of the 76 and 79 Series without the bulky look of clip-on alternatives. UV-resistant materials mean the finish stays consistent rather than yellowing or warping after a summer or two under harsh Australian sun.
Each set covers all four doors, so you are not hunting for a rear pair separately. Installation uses automotive-grade adhesive tape already applied to the shield. Clean, peel, press and you are done, no drilling, no brackets, no specialist tools.
Built for Australian conditions.
2.3MM CONSTRUCTION
At 2.3mm these shields are significantly thicker than the 1.5mm standard, reducing flex, rattling and the risk of cracking on rough tracks or in cold temperatures.
UV-RESISTANT FINISH
Moulded from UV-resistant acrylic that resists fading, yellowing and warping, keeping the slim profile looking factory-fresh across Australian summers.
FULL SET INCLUDED
Front and rear door shields are included in every set, so you get complete coverage in a single purchase with no need to source rear shields separately.
Vehicle fitment.
Installation overview.
CLEAN THE SURFACE
Wipe down the door frame application area thoroughly and allow it to dry completely. Any moisture or dust under the tape will reduce adhesion.
PEEL & POSITION
Peel back a section of the tape backing, position the shield against the door frame and press firmly along the full length while removing the remaining tape.
CURE TIME
Apply firm, even pressure along the entire visor edge once fitted. Avoid washing the vehicle for 48 hours to allow the adhesive to reach full bond strength.