S8 White Straight LED Light Bar
Slim-profile, high-output, universal fit
The Baja Designs S8 White Straight LED Light Bar packs eight LEDs per 10-inch section into a slim, sleek housing, delivering serious output from 10 inches right up to 50 inches. Available in five sizes to suit any build, the S8 is backed by a Limited Lifetime Warranty for complete purchase protection.
FREE delivery, Australia-wide
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Why the S8 stands out.
Baja Designs engineered the S8 around a deceptively slim profile that doesn't compromise on performance. Eight LEDs per 10-inch section, high-performance reflectors, and CopperDrive technology ensure every LED is driven at 100 percent for consistent, reliable output across the full bar.
The 5000K daylight colour temperature reduces driver fatigue on long touring stints and delivers natural, true-to-life colour rendering on the trail. Add in the amber backlit feature and the S8 looks as sharp parked up as it does lit up at night.
MoistureBlock construction makes the S8 fully waterproof, rain-proof and submersible, so it handles whatever a West Australian rock crossing or a Queensland wet-season track can throw at it. uService replaceable lenses and optics mean the bar can be serviced rather than replaced if the going gets rough.
Built-in Baja Designs technology.
COPPERDRIVE
Every LED is driven at 100 percent, maximising output and ensuring consistent performance across the life of the bar.
MOISTUREBLOCK
Fully waterproof, rain-proof and submersible construction keeps the internals protected in creek crossings, heavy rain and dusty outback conditions.
5000K DAYLIGHT
Natural daylight colour temperature reduces driver fatigue on extended drives and renders colours accurately on the trail.
Installation overview.
CHOOSE YOUR HARNESS
Select harness 640122 (on/off with mode switch for backlight) or 640115 (on/off 3-pin, suits one light 10 to 30 inch) depending on your bar size and backlight requirements. Purchase separately.
POSITION THE BAR
Fit the S8 to your chosen mounting location, such as a bull bar, roof rack or A-pillar bracket, using appropriate hardware for your vehicle and mount.
WIRE TO HARNESS
Connect the bar to the harness following the harness instructions, routing the loom cleanly away from heat sources and moving parts.
TEST AND SEAL
Power up to confirm correct operation of the main beam and amber backlight before finalising cable routing and securing all connections.