S2 Sport Black LED Auxiliary Light Pod
Compact, powerful auxiliary lighting by Baja Designs
The Baja Designs S2 Sport delivers genuine Baja Designs quality and finish in a compact auxiliary pod, priced to suit a wider build budget. Available in four beam patterns and five lens colours, it works equally well as a fog, cornering, rack, reverse or work light.
FREE delivery, Australia-wide
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Baja Designs quality at a sharper price.
The S2 Sport carries the same fit and finish that Baja Designs is known for worldwide, without the premium price tag. Whether you need a dedicated fog light up front, a cornering light on the A-pillar, a reverse light out back, or a scene light over a rack, the S2 Sport handles the job confidently.
Every S2 Sport runs its LEDs at 100 percent power via CopperDrive technology, and the 5000K daylight output keeps colour rendering natural to reduce driver fatigue on long nights. MoistureBlock construction means the housing is fully waterproof and submersible, so mud, creek crossings and heavy rain are not a concern.
Replaceable lenses and optics through Baja Designs' uService programme mean the light can be serviced and updated rather than replaced, protecting your investment for the long haul.
Built-in Baja Designs technology.
COPPERDRIVE
LEDs are driven at 100 percent capacity for maximum output and consistent performance throughout the life of the light.
MOISTUREBLOCK
Fully waterproof, rain-proof and submersible construction keeps the internals protected in the harshest conditions.
5000K DAYLIGHT
Natural daylight colour temperature reduces driver fatigue and renders colours accurately on the trail or worksite.
Installation overview.
CHOOSE YOUR POSITION
Select your mounting location, such as the bumper, A-pillar, roof rack or rear bar, and source a compatible bracket for the S2 Sport pod.
MOUNT THE POD
Secure the pod to your chosen bracket and position using the supplied hardware. Aim the beam before fully tightening.
WIRE IT UP
Run the wiring back to your switch or wiring harness. Baja Designs wiring harnesses are available separately and are recommended for a clean, protected install.
ADJUST AND TEST
Power on the light, fine-tune the aim, then lock off all fasteners. Lenses and optics can be swapped later via the uService programme if your needs change.