S2 Pro Black LED Auxiliary Light Pod Pair
Amber, Drive Combo beam
The Baja Designs S2 Pro Black is a compact, high-output auxiliary LED light pod built for serious off-road and overland use. This pair is spec'd in Amber with a Drive Combo beam pattern, delivering long-range illumination through dust, rain and fog where white light falls short.
Item code: 487813
FREE delivery, Australia-wide
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Amber light cuts through the worst.
White light scatters in dust, fog and heavy rain. Amber output sits at a wavelength that cuts through airborne particles rather than bouncing back at the driver, keeping your vision lane clear when conditions deteriorate fast.
The S2 Pro is Baja Designs' compact workhorse pod. The black housing keeps the fitment low-profile on the vehicle, and the Drive Combo beam blends a tight central throw with enough peripheral spread to illuminate track edges and obstacles off to the sides.
Sold as a matched pair so both sides of your bar, bumper or A-pillar are covered from a single purchase with consistent output across both pods.
S2 Pro Black built for the long haul.
AMBER OUTPUT
Amber wavelength light penetrates dust, fog and rain far more effectively than white, reducing glare and keeping the road ahead visible in challenging outback and wet-weather conditions.
DRIVE COMBO BEAM
The Drive Combo pattern merges a focused long-distance hotspot with a wider spread, giving you reach down the track and enough side light to catch animals and obstacles at the edges.
MATCHED PAIR
Both pods are supplied together and factory-matched for consistent colour and output, so there is no mismatched warmth or brightness between left and right.
Installation overview.
CHOOSE YOUR MOUNT
Decide on your mounting position, whether that is a bull bar, A-pillar bracket, roof rack rail or aftermarket light bar. Confirm the bracket suits the S2 Pro's mounting foot before drilling or cutting.
FIT THE PODS
Secure each pod to the chosen bracket using the supplied hardware. Adjust the aim before fully tightening so beam alignment is set correctly for your vehicle's ride height.
WIRE VIA RELAY HARNESS
Run the wiring through a dedicated relay harness with an inline fuse. Connect the trigger wire to your preferred switch input and route cables away from heat sources and moving parts, securing with conduit or loom wrap.