S2 Pro Black Flush Mount LED Pod
Baja Designs auxiliary light, universal fit
The Baja Designs S2 Pro Flush Mount delivers 2,245 raw lumens from a compact 3 x 2 inch housing, making it one of the brightest LED auxiliary pods available for its size. Flush-mount design means it fits where traditional lights simply cannot go.
FREE delivery, Australia-wide
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Maximum output, minimum footprint.
Most auxiliary lights demand real estate. The S2 Pro Flush Mount was designed for the opposite. At just 3 inches wide and 2 inches tall, it tucks cleanly into a rear bumper cut-out, body panel recess or any tight spot where a conventional pod would never sit. The result is a clean, integrated look without sacrificing any output.
Baja Designs runs the S2 Pro's LED at 100 percent capacity via their CopperDrive technology, which is why the raw lumen figure is genuinely impressive for the housing size. A 5000K daylight colour temperature keeps the light natural and reduces driver fatigue on long nights. ClearView optics focus every lumen exactly where it needs to go, while MoistureBlock sealing makes the unit waterproof, rain-proof and submersible. Replaceable lenses and optics through the uService programme mean the light can be serviced rather than replaced if a lens is damaged.
Built around Baja Designs technology.
COPPERDRIVE
The LED is driven at 100 percent capacity, extracting every lumen the diode is rated to produce rather than running it conservatively.
CLEARVIEW OPTICS
Precision-engineered optics direct all available light into the chosen beam pattern with minimal scatter or wasted output.
MOISTUREBLOCK SEALING
The housing is fully waterproof, rain-proof and submersible, so harsh creek crossings and pressure washing are not a concern.
Installation overview.
CHOOSE YOUR PATTERN
Select the beam pattern and lens colour that suits your application before cutting any mounting apertures. Spot and Driving/Combo suit distance work; Wide Cornering and Work/Scene suit low-speed and camp use.
CUT OR FABRICATE THE MOUNT
Mark and cut the flush-mount aperture in your bumper or panel to the housing dimensions. The compact 3 x 2 inch footprint keeps the cutout small.
WIRE AND SECURE
Run wiring to a suitable switched power source. The kit includes the hardware needed to lock the pod in place and seal it against the mounting surface.