Looks fantastic, factory finish if not better. How Toyota should make them.
Now bundled with MBQuart speakers
Front or Rear Speaker Door Pods
Front or Rear Speaker Door Pods
70 Series LandCruiser
From $499.00Sold Out
Choose your setup. We’ll match the right kit.
Pick the LandCruiser in your driveway, choose your MBQuart speakers, then your pod colour. We’ll automatically bundle the correct plug n play wiring kit free with any speaker upgrade.
01 Vehicle. Choose the LandCruiser in your driveway.
02 Speakers. 1 pair of MBQuart speakers ships in the bundle. Or skip and add later.
Not sure what speakers to choose?
03 Colour. Grey or Black pod finish.
$499.00Sold Out
Door pods
$499.00
Total$499.00
FREE delivery, Australia-wide
Dispatch date confirmed at order
Wiring kit free when MBQuart speakers are added.
The rear doors need cutting for the speakers. On the front doors, a standard 6.5″ speaker fits with no cutting of the door metal. 6×9″ speakers need the door opening cut, front and rear.
WHY PVS?
Not all door pods are equal.
Here is how PVS Door Pods compare to the timber-and-vinyl kits on the market.
Pod material
PVS Automotive
Injection-moulded plastic
Generic
Timber wrapped in vinyl
USB-C 35W PD charging
PVS Automotive
Every door
Generic
None
Puddle lights
PVS Automotive
Every door
Generic
Not included
Speaker grilles
PVS Automotive
CNC billet aluminium mesh
Generic
Stamped plastic
Speaker cut-outs
PVS Automotive
6.5" and 6x9"
Generic
One size only
Bottle holders + storage
PVS Automotive
Supersized, all 4 doors
Generic
Limited or none
Warranty + AU support
PVS Automotive
12 months, AU-backed
Generic
Often unclear
| PVS AutomotiveEngineered for the bush | Generic Door Pods | |
|---|---|---|
| Pod material | Injection-moulded plastic | Timber wrapped in vinyl |
| USB-C 35W PD charging | Every door | None |
| Puddle lights | Every door | Not included |
| Speaker grilles | CNC billet aluminium mesh | Stamped plastic |
| Speaker cut-outs | 6.5" and 6x9" | One size only |
| Bottle holders + storage | Supersized, all 4 doors | Limited or none |
| Warranty + AU support | 12 months, AU-backed | Often unclear |
Why you'll love them
Injection-moulded, not timber
Most "door pod" upgrades are timber boxes wrapped in vinyl. Ours are precision injection-moulded plastic. Built once, built right, built to outlast the truck.
USB-C 35W PD on every door
Charge any modern phone, tablet, or laptop from any seat at full speed. The plug and play wiring kit takes ignition power from the headunit power plug.
Puddle lights, every door
Soft floor lighting on door open. Safer entry and exit at night, in the bush, or on the camp ground. The plug and play wiring kit picks up the puddle light negatives from the door switches.
Billet mesh speaker grilles
CNC-cut billet aluminium mesh, not the stamped plastic grilles you find on the cheap kits. Proper acoustic transparency, proper finish.
Designed for 6.5" and 6×9"
Cut-outs sized for the most common aftermarket speaker formats. Use any MBQuart from the bundle, or bring your own.
Supersized door pockets
Front doors get oversized storage with a 1L bottle holder. All four doors get bottle holders sized for the back roads.
Speaker specs.
Side-by-side specs for every MBQuart speaker in the bundle picker. Higher RMS doesn’t always mean louder. Sensitivity and tweeter design matter just as much.
| DK2-116 | PK1-116 | PK1-169 | |
|---|---|---|---|
| Discus 6.5″ coax | Premium 6.5″ coax | Premium 6×9″ coax | |
| Size | 6.5″ | 6.5″ | 6×9″ |
| Configuration | 2-Way Coaxial | 2-Way Coaxial | 2-Way Coaxial |
| RMS power | 60W each | 55W each / 110W system | 55W each / 110W system |
| Peak power | 120W each | 110W each / 220W system | 110W each / 220W system |
| Impedance | 4 ohms | 4 ohms | 4 ohms |
| Sensitivity | 88 dB | 88.5 dB | 85.5 dB |
| Frequency response | 55 Hz – 20 kHz | 55 Hz – 22 kHz | 55 Hz – 22 kHz |
| Tweeter | Aluminium inverted dome | 1″ Magnesium WideSphere | 1″ Magnesium WideSphere |
| Cone material | Polypropylene + butyl rubber | Aerated paper + mica | Aerated paper + mica |
| Crossover | Built-in | 6 dB / octave integrated | 6 dB / octave integrated |
| Grills included | Yes | Yes | Yes |
| Warranty | 12 months | 12 months | 12 months |
| Bundle price | $169 | $339 | $449 |
Quick guide: the DK2-116 is the affordable upgrade pick. Clean factory-replacement sound. The PK1-116 steps up to the Magnesium WideSphere tweeter for sharper high-end and a smoother off-axis response. The PK1-169 is the same Premium tier in 6×9″ for extra cone area in the rear doors.
Fitment
76 Series Wagon
GXL and Workmate, 2008 to 2026
78 Series Troop Carrier
GXL and Workmate, 2008 to 2026
79 Series Single Cab
GXL and Workmate, 2008 to 2026
79 Series Dual Cab
GXL and Workmate, 2008 to 2026
Compatible with both LHD and RHD trucks. Use the Vehicle picker above to auto-match the right wiring kit for your truck.
Installation
Plug n Play install on most trucks. Plan two to three hours per door pair if you have not done a door card before; faster if you have.
- 1
Disconnect the battery
Pop the negative terminal off before opening the door card.
- 2
Remove the factory door card
Pop the trim, unscrew the visible Phillips screws, lift up and off the latch rod.
- 3
Mount the speakers
Drop your MBQuart speakers into the pod’s billet mesh grille mount and bolt them down with the supplied hardware.
- 4
Plug the wiring kit in
Snap the harness into the matching factory plug. No splicing on Plug n Play kits. DIY kit runs new wire through the door for vehicles without a factory plug.
- 5
Wire the USB-C and puddle light
Every door pod set comes with a plug and play wiring kit. It plugs into the back of the headunit, takes ignition power from the headunit power plug and picks up the puddle light negatives from the door switches. Kits shipped before September 2026 may be wired differently. An auto electrician can do this part in under an hour if you’re not comfortable.
- 6
Bolt the pod to the door card
Use the supplied mounting hardware. Pre-drilled holes line up with factory door card cutouts.
- 7
Reinstall the door card
Reverse step 2. Make sure the latch rod clicks back in.
- 8
Reconnect and test
Battery back on. Test speakers, USB-C, puddle lights, and door operation before the next door.
Watch the full step-by-step install video on our YouTube channel. Professional installation recommended if you have not removed a door card before.
Important notes
Speakers may require cutting to fit
The rear doors need cutting for the speakers. On the front doors, a standard 6.5″ speaker fits with no cutting of the door metal. 6×9″ speakers need the door opening cut, front and rear. The door cards have no factory speaker opening, so the card is always cut for the speaker, its wiring and its magnet.
Speakers are not included in the pod price
Add an MBQuart pair from the bundle picker above, or skip and source your own 6.5″ or 6×9″ pair. On a factory-wired GXL, an MBQuart pair also adds the Basic Plug n Play wiring kit free.
USB-C and puddle lights run from the loom
Every door pod set comes with a plug and play wiring kit that plugs into the back of the headunit. Ignition power comes from the headunit power plug and the puddle light negatives come from the door switches. Kits shipped before September 2026 may be wired differently. If you’re not comfortable with auto-electrical work, get an installer to do this part.
Overseas-delivered trucks with factory electric mirrors
The Basic Plug n Play kit piggybacks off the factory mirror plug, so overseas-delivered trucks with factory electric mirrors aren’t supported and need the DIY Plug n Play wiring kit. Australian-delivered 79 Dual Cabs never came with factory electric mirrors.
Workmate, Troopy, Single Cab and 76 Wagon GXL 2023-2026
These trims don’t have a factory plug to piggyback off, so the DIY Plug n Play wiring kit comes in the box with the door pods. It includes everything to wire the speakers from scratch.
12-month warranty, AU-backed
AU stock, AU support. Anything fails inside the warranty window, contact PVS and we’ll sort it.
In the box.
Front or Rear Door Pods
MBQuart Speakers
Plug n Play Wiring Kit Free
Mounting hardware
Buy direct from PVS.
Get the support to fit it with confidence.
When you buy directly from PVS Automotive, you get access to fitting guides, our Australian-based phone and email support, and the team that engineered the product. We help you pick the right wiring kit for your truck before you buy and answer install questions after the parts arrive.
Customer Reviews
Real feedback from door pod customers.
Awesome product. When they first arrived I knew they would be a perfect fit. Quality is exactly what I was looking for.
Well worth the wait for the new designs, and couldn’t ask more from a company willing to back its product. Bolt-up was clean, the USB-C is a game changer for road trips.
Great product, fits really well, exactly what I wanted. The puddle lights are a brilliant touch on dark camp ground entries.