Reverse Camera Retention Harness Keep your factory Toyota reverse camera with an aftermarket headunit
Swap out your factory Toyota headunit without losing your reverse camera. This retention harness plugs your existing OEM camera straight into an aftermarket head unit, no cutting or splicing required.
or 4 interest-free payments of $19.75 with Shop Pay & Afterpay
Item code: REVERSECAMHARNESS-4PIN
Australian Owned and Operated.Australian Owned Certified · AO 08314
Keep what already works.
Toyota's factory reverse cameras are well-positioned, neatly integrated and perfectly calibrated for the vehicle. When upgrading to an aftermarket headunit, most owners assume the camera has to go with it. This harness means it doesn't.
Simply identify the correct plug type at the back of your factory headunit, select the matching harness, and connect your OEM camera directly to your new unit. No wire cutting, no guesswork on pin-outs, no losing a feature you already paid for.
Note: this harness is designed to connect a factory Toyota camera to an aftermarket headunit only. It will not allow an aftermarket camera to be used with a factory Toyota headunit.
Designed to make the swap straightforward.
PLUG-AND-PLAY
Connects directly between your factory Toyota camera and the aftermarket headunit. No cutting or splicing into your vehicle's wiring.
TWO PLUG OPTIONS
Available in 4-Pin and 24-Pin variants to suit the different factory camera connectors found across Toyota models. Check your existing headunit plug before ordering.
CLEAR WIRE IDENTIFICATION
Reverse trigger wire is Red/Brown and ground is Black, making connection to your aftermarket headunit clean and straightforward.
Vehicle fitment.
Installation overview.
CHECK YOUR PLUG
Remove the factory headunit and locate the reverse camera connector. Confirm whether it is a 4-Pin or 24-Pin plug, then ensure you have ordered the correct harness.
CONNECT THE HARNESS
Plug the retention harness into the factory camera connector. Connect the Red/Brown reverse trigger wire and Black ground wire to the corresponding inputs on your aftermarket headunit.
SECURE AND TEST
Reinstall the headunit, engage reverse and confirm the camera feed is displaying correctly on your new unit.
