SBD 12.9″ DTS Certified Touchscreen Radio 2017 to 2024 Nissan R35 GTR plug-and-play headunit
Speed By Design's 12.9-inch touchscreen radio is a full plug-and-play replacement headunit for the R35 GTR, bringing a 1080p HD display, DTS Certified 28-bit audio, Android 13, and wireless Apple CarPlay and Android Auto to your cabin without cutting a single wire.
or 4 interest-free payments of $824.75 with Shop Pay & Afterpay
Australian Owned and Operated.Australian Owned Certified · AO 08314
A screen worthy of the GTR.
The R35 GTR's factory infotainment was never its strongest suit. Speed By Design set out to fix that with a unit engineered specifically for the GTR, not a generic din solution shoehorned in with adapter plates and compromises. Every connector is factory-matched, installation is 100% plug-and-play, and no cutting or splicing is required.
The 12.9-inch 1080p display fills the dash properly, and the DTS Certified 28-bit 192 Hz audio system means the upgrade extends well beyond the screen. HDMI output lets the unit pair directly with the SBD Digital Dash, while BLE and the updated BTLE EcuTek 2.0 OBD2 dongle support keeps your tuning and data logging workflows intact.
For 2025, SBD has added a new OEM GPS antenna adapter so navigation runs on the factory antenna with no extra hardware. Factory backup cameras are supported out of the box, and aftermarket camera options are compatible too. Available in factory black trim to keep the interior looking as it left the factory floor.
Everything you need, nothing you don't.
12.9-INCH 1080P DISPLAY
A large-format HD touchscreen fills the R35 dash properly, delivering sharp resolution for maps, media and camera feeds.
DTS CERTIFIED AUDIO
28-bit 192 Hz DTS Certified processing and 5V amp pre-outs give you a genuinely high-fidelity audio system, not just a louder one.
ANDROID 13 OS
A modern Android 13 operating system keeps the unit current, with access to apps, streaming services and over-the-air updates.
Vehicle fitment.
Installation overview.
REMOVE FACTORY RADIO
Follow the SBD 2017 to 2024 GTR Factory Radio Removal guide to safely extract the OEM headunit without damage to trim or wiring.
CONNECT FACTORY LOOMS
Plug the included factory-matched connectors into the vehicle harness. No modification to the vehicle wiring is required.
CONNECT GPS ANTENNA
Use the included OEM GPS antenna adapter to connect the factory antenna directly to the unit for plug-and-play navigation.
CONFIGURE AND TEST
Power on, pair your phone via wireless CarPlay or Android Auto, and verify backup camera feed and EcuTek OBD2 dongle connectivity before refitting trim.