LP4/LP9 Sport Splitter Harness
Universal wiring, sheathed and pinned
Add an extra LP4 or LP9 Sport light to your existing Baja Designs setup without any guesswork. This splitter harness arrives fully sheathed, pinned and ready to connect.
FREE delivery when you spend over $100
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
One more light, zero hassle.
When you want to expand your LP series lighting setup, the last thing you need is a wiring headache. Baja Designs designed this splitter harness specifically for LP4 and LP9 Sport lights, so the connection is clean, secure and draws correctly through your controller module harness.
The harness is fully sheathed for protection against vibration, heat and moisture, and every pin is already fitted so there is no crimping or guesswork on the trail. Just verify your controller harness capacity before adding lights, and keep the notes below in mind to avoid overloading your setup.
Built to expand your kit.
PRE-PINNED CONNECTORS
Every connector arrives pinned and ready to plug in. No crimping tools, no loose terminals and no time wasted on the install.
FULLY SHEATHED
The entire harness run is sheathed to resist abrasion, heat and moisture, keeping your wiring tidy and protected in demanding off-road conditions.
CONTROLLER COMPATIBLE
Designed to work through your existing controller module harness on 64-0172 and 64-0175 setups, with draw limited to controller capacity.
Installation overview.
CHECK CAPACITY
Confirm your controller module harness (64-0172 or 64-0175) has sufficient capacity for the additional light. Note: this harness does not support adding a third LP6 or LP9 Pro to those harnesses.
CONNECT SPLITTER
Plug the splitter harness into your existing controller harness connection point. All connectors are pre-pinned, so no additional termination is needed.
MOUNT AND ROUTE
Mount your additional LP4 or LP9 Sport light, route the sheathed harness clear of heat sources and moving parts, and secure with the supplied looms or cable ties.