LED Rock Light Kit
Amber, universal fit, turn-key wiring included
Baja Designs' Universal Amber Rock Light Kit puts 400 lumens at each corner of your vehicle with pre-cut wiring and everything you need to get lit straight out of the box. No relay guesswork, no measuring leads, just clean amber light where you need it.
Item code: 447056
FREE delivery, Australia-wide
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Amber light, zero headache.
Most rock light kits leave you hunting for the right wire lengths, sourcing relays and pinning connectors at the side of the track. Baja Designs cut all of that out. Every lead in this kit is pre-cut to reach all four corners of a small to mid-sized vehicle, with enough slack to route wiring the way you actually want it.
The amber output is smooth and wide, with a 180 degree optic that floods wheel wells, rockers and underbody panels evenly. Being fully waterproof, the lights mount virtually anywhere on the underside of the vehicle. All they need is a 12V source.
Note: these lights generate heat during extended use. Take care when handling after prolonged operation and allow them to cool before touching during installation or servicing.
What comes in the kit.
TURN-KEY WIRING
Pre-cut leads sized to reach all four corners of a small to mid-sized vehicle, with extra slack for flexible routing.
400 LUMENS PER LIGHT
Four individual LED rock lights each producing 400 lumens of smooth, bright amber output.
180° OPTIC
Wide-spread optic illuminates wheel wells and underbody panels evenly without hot spots.
Installation overview.
PLAN YOUR ROUTE
Lay the pre-cut leads along the underside of the vehicle from your power source to each corner to confirm routing before drilling.
MOUNT THE LIGHTS
Secure each rock light at the desired location on the wheel well or rocker. The waterproof housing allows mounting in exposed positions.
RUN THE WIRING
Route each pre-cut lead back to your 12V power source, securing the loom away from exhaust and moving components.
CONNECT POWER
Connect to a switched 12V source. No relay pinning required as the kit is supplied ready to connect.