LED Dome Light with Switch
Amber, waterproof, mounts anywhere
A compact Baja Designs LED dome light in amber that mounts virtually anywhere a 12-volt supply is available. Waterproof construction and a 180-degree optic make it equally at home in a cab, engine bay, wheel well or camp setup.
Item code: 398057
FREE delivery, Australia-wide
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Versatile light, anywhere you need it.
Baja Designs built this dome light to go where you need it, not where your vehicle's factory wiring dictates. Run a 12-volt feed to any mounting point and you have a working light, whether that is inside a canopy, under a bonnet, in a wheel arch or clipped to a camp awning frame.
The amber LED output and wide 180-degree optic spread light smoothly across a surface without the harsh hotspot of a traditional globe, while the integrated switch means you are not hunting for a separate isolator. The waterproof rating keeps moisture and dust from cutting the life short, even in exposed locations.
Note: this light can become very hot during extended use. Allow adequate ventilation around the unit and take care when touching it after prolonged operation.
Built for real-world use.
WATERPROOF HOUSING
Sealed construction shrugs off rain, mud and hose-downs, making it a reliable choice for exposed mounting positions like engine bays and wheel wells.
180° OPTIC
A wide-angle optic floods a broad area with smooth, even amber light, eliminating dark spots and reducing eye strain in enclosed spaces.
INTEGRATED SWITCH
The on-board switch lets you control the light directly at the fitting, no relay, no separate toggle panel and no extra wiring runs required.
Installation overview.
CHOOSE YOUR LOCATION
Select a mounting surface, cab headliner, engine bay panel, wheel well or canopy interior. Ensure there is clearance for heat dissipation and that the surface can accept a small fastener.
RUN YOUR 12 V FEED
Route a fused 12-volt positive and earth wire to the mounting location. Keep wiring clear of sharp edges and hot surfaces.
MOUNT AND CONNECT
Fasten the light to the surface, connect the wiring to the terminals and test the integrated switch before finalising cable management.