LP6/LP9 Pro 2-Light Max Wiring Harness
Plug-and-play power for dual LP6 or LP9 Pro lights
The Baja Designs LP6/LP9 Pro 2-Light Max Wiring Harness gives you a clean, ready-to-run electrical solution for running two LP6 or LP9 Pro auxiliary lights. No splicing guesswork, no undersized wiring, just a properly engineered harness built to match the demands of Baja Designs' own lighting.
Item code: 640172
FREE delivery, Australia-wide
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Wired the right way.
Auxiliary lighting is only as reliable as the wiring behind it. Undersized or poorly routed wiring can rob your lights of performance, cause voltage drop, or create heat and reliability issues out on the track or trail.
Baja Designs engineered this harness specifically for the LP6 and LP9 Pro platform, so you know the connectors, relay capacity and cable gauge are matched precisely to those lights. Installing two lights at once is straightforward, with a dedicated dual-output layout that keeps things tidy under the bonnet.
If you are already running Baja Designs LP6 or LP9 Pro pods, this is the harness to pair them with. It takes the complexity out of the electrical side so you can focus on mounting and aiming your lights.
Harness highlights.
BRAND-MATCHED
Engineered by Baja Designs specifically for LP6 and LP9 Pro pods, ensuring full electrical compatibility straight out of the box.
DUAL-LIGHT READY
Single harness supports two lights simultaneously, keeping your install clean and your wiring runs to a minimum.
MAX SPECIFICATION
Max-grade harness construction is built to handle the power demands of the LP6 and LP9 Pro lights without compromise.
Installation overview.
MOUNT YOUR LIGHTS
Secure both LP6 or LP9 Pro pods in your chosen mounting positions before running wiring.
CONNECT THE HARNESS
Plug the harness connectors into each light using the dedicated dual outputs. The matched connectors seat firmly and correctly first time.
ROUTE AND SECURE
Run the harness to your battery, routing away from heat sources and moving parts. Use the supplied relay and fusing as the power connection point.
SWITCH AND TEST
Connect your switch input, confirm all connections are secure, then test both lights for correct operation.