Tasmanian White Tapered Armrest 70 Series LandCruiser
Tasmanian White is a nod to the pale, weathered timbers of Tasmania's alpine highlands, where the elements strip colour back to something raw and honest.
or 4 interest-free payments of $37.25 with Shop Pay & Afterpay
Item code: ARM-LC70-IV-TP
Australian Owned and Operated.Australian Owned Certified · AO 08314
Why this part
exists.
Give your LC70 door the armrest it was always missing. The PVS Automotive 70 Series Tasmanian White Tapered Armrest is solid natural timber, fitted in seconds without a single tool, and removable just as quickly. Built for the doors of the LC71, LC76, LC78 and LC79, sold as a matched left and right pair.
The LC70 door card is a study in honest utility. Vinyl, a window crank, a latch. Nothing wasted. But spend a day on corrugated dirt or an hour in slow highway traffic and the missing armrest makes itself known. You reach for something that is not there. The factory never fitted one. Most of what the aftermarket offers in its place is cheap plastic, vacuum formed into shape and finished to a price. PVS Automotive started from a different brief: solid natural timber, a profile shaped for the forearm, and a fitment system that does not touch the door card with a drill or leave anything behind when you pull it off. The result is the Tasmanian White Tapered Armrest. Tasmanian White is a close-grained hardwood that takes a clean edge and holds it. The tapered profile reduces bulk toward the leading edge so the armrest sits naturally under the arm without crowding the window switch or the latch. Every piece is cut from real timber, which means every piece carries its own grain. No two pairs are identical. That is the point.
Three things that matter.
MAGNETIC FIT. NO TOOLS. NO DAMAGE.
The armrest hooks over the top window seal of the door. Strong magnets then seat it flush against the door frame. No bolts, no screws, no drilling, no adhesive, no marks left on the door when you remove it. Installs in seconds by hand. Reposition it, swap it between vehicles, or take it off entirely whenever you like. Before fitting, wipe the door and window seal clean so no trapped grit sits between the magnet and the frame over time.
SOLID TIMBER WHERE THE MARKET USES PLASTIC.
Most armrests on the market are cheap plastic and vacuum formed. This one is solid Tasmanian White, a close-grained hardwood that holds a clean edge and does not flex under load the way thin plastic does. The tapered profile is cut from the solid, not moulded. It feels different because it is different in every material sense.
NATURAL TIMBER. EVERY PAIR IS ITS OWN.
Because this is real timber, every piece carries its own grain pattern and small natural character marks. The colour can shift slightly between the left and right of a pair. These are not defects. They are the evidence that nothing here was injection moulded. Each set comes out of the timber raw and unrepeatable. If you wanted matching plastic, there is plenty of that available elsewhere.
Vehicle fitment.
Installation overview.
CLEAN THE DOOR AND SEAL
Wipe the door panel and the top window seal clean with a dry cloth. Remove any grit or debris from the area where the magnet will contact the door frame. This step protects the door finish over the long term.
PREPHOOK OVER THE WINDOW SEAL
Hook the armrest over the top of the door window seal. Position it at your preferred fore and aft location along the door.
HOOK FITLET THE MAGNETS SEAT
Allow the magnets to pull the armrest flat against the door frame. No pressing or forcing required. The armrest is secure and ready to use. Repeat for the opposite door.
DONEWhat's included.
Confirm final contents before ordering. Sold as a matched pair only.
