Kostenloser Versand für alle australischen Bestellungen über 150 $
Jetzt im Paket mit MBQuart Lautsprechern

Türverkleidungen für Frontlautsprecher mit Ablagefach
Land Cruiser der 70er-Serie

Built once. Built right. No timber, no vinyl, no shortcuts.

★★★★★5.010 reviews·200+ sold·Trending

From $699.00

pvs-front-speaker-door-pods-to-suit-toyota-landcruiser-70-series-landcruiser-pair card

Build your kit. We’ll match the right wiring.

Pick your LandCruiser below and we’ll confirm the fit.
Free Plug n play wiring kit free when you add MBQuart speakers.
01 Your LandCruiser

Which one is in your driveway?

02 Model

Workmate or GXL, and the year. This decides your wiring kit.

03 Speakers

Two pairs ship in the bundle. Or skip and add later.

Not sure what speakers to choose?
04 Colour

Grey or Black pod. Both run a black front face.

$699.00

FREE delivery, Australia-wide

Dispatching August

Wiring kit free when MBQuart speakers are added.

Pre-order. Cancel any time before dispatch for a full refund. No fee.

200+ units on the road
5.0 ★ from 10 reviews
12-Month Australian Warranty
Designed and Tested for Australian Conditions
Injection Moulded for Strength and Consistency
Plug and Play Retains Factory Controls

Please note: the front door pods fit standard 6.5″ speakers as supplied. 6×9″ speakers will require cutting at the front for the speaker to fit.

WHY PVS?

Not all door pods are equal.

Here is how PVS Door Pods compare to the timber-and-vinyl kits on the market.

Pod material
PVS Automotive
Injection-moulded plastic
Generic
Timber wrapped in vinyl
USB-C 35W PD charging
PVS Automotive
Every door
Generic
None
Puddle lights
PVS Automotive
Every door
Generic
Not included
Speaker grilles
PVS Automotive
CNC billet aluminium mesh
Generic
Stamped plastic
Speaker cut-outs
PVS Automotive
6.5" and 6x9"
Generic
One size only
Bottle holders + storage
PVS Automotive
Supersized, all 4 doors
Generic
Limited or none
Warranty + AU support
PVS Automotive
12 months, AU-backed
Generic
Often unclear
PVS AutomotiveEngineered for the bush Generic Door Pods
Pod materialInjection-moulded plasticTimber wrapped in vinyl
USB-C 35W PD chargingEvery doorNone
Puddle lightsEvery doorNot included
Speaker grillesCNC billet aluminium meshStamped plastic
Speaker cut-outs6.5" and 6x9"One size only
Bottle holders + storageSupersized, all 4 doorsLimited or none
Warranty + AU support12 months, AU-backedOften unclear
Why PVS pods

Built once
Built right.

No timber. No vinyl. No shortcuts.

Every door in your 70 Series, done properly. Injection moulded for strength and consistency, in a grain finish matched to your factory arm rests and interior plastics, so the pods read like they left the factory that way.

A real storage pocket with a proper cup holder, USB-C 35W PD charging and puddle lights in every door. Bundle it with MBQuart speakers and the right plug n play wiring kit comes free, matched to your vehicle automatically.

Jede Tür, ordnungsgemäß durchgeführt.

Injection moulded, not timber wrapped in vinyl. Fitted, wired and finished like factory.

A Pocket You Actually Use

A real cup holder, not a moulded suggestion. Deep enough for a bottle, a phone and the things that live in your door.

Puddle Lights

Courtesy lighting in every door, wired to a switched 12V or auxiliary fuse. Finds the ground on a dark camp at 3am.

USB-C 35W PD

Fast charging where your hand already is. No more stretching a cable across the cab from the dash.

Grey Or Black

Both run a black front face. Grain finish matched to your factory arm rests, so the colour reads like it belongs.

Billet Mesh Grille

Your MBQuart speakers drop straight into the mount. 6.5" and 6x9" both fit, no adaptors, no packers.

Tested Here

Designed and tested for Australian conditions, on the trucks that live in them. 12-month Australian warranty.

Speaker specs.

Side-by-side specs for every MBQuart speaker in the bundle picker. Higher RMS doesn’t always mean louder. Sensitivity and tweeter design matter just as much.

DK2-116 PK1-116 PK1-169
Discus 6.5″ coax Premium 6.5″ coax Premium 6×9″ coax
Size6.5″6.5″6×9″
Configuration2-Way Coaxial2-Way Coaxial2-Way Coaxial
RMS power60W each55W each / 110W system55W each / 110W system
Peak power120W each110W each / 220W system110W each / 220W system
Impedance4 ohms4 ohms4 ohms
Sensitivity88 dB88.5 dB85.5 dB
Frequency response55 Hz – 20 kHz55 Hz – 22 kHz55 Hz – 22 kHz
TweeterAluminium inverted dome1″ Magnesium WideSphere1″ Magnesium WideSphere
Cone materialPolypropylene + butyl rubberAerated paper + micaAerated paper + mica
CrossoverBuilt-in6 dB / octave integrated6 dB / octave integrated
Grills includedYesYesYes
Warranty12 months12 months12 months
Bundle price$169$339$449

Quick guide: the DK2-116 is the affordable upgrade pick. Clean factory-replacement sound. The PK1-116 steps up to the Magnesium WideSphere tweeter for sharper high-end and a smoother off-axis response. The PK1-169 is the same Premium tier in 6×9″ for extra cone area in the rear doors.

Passgenauigkeit

78 Series Troop Carrier
GXL and Workmate, 2008 to 2026
79 Series Single Cab
GXL and Workmate, 2008 to 2026
76 Wagon · 79 Dual Cab
Built for vehicles with rear doors. See the Front + Rear bundle instead.

Compatible with both LHD and RHD trucks. Use the Vehicle picker above to auto-match the right wiring kit for your truck.

Installation

Plug n Play install on most trucks. Plan two to three hours per door pair if you have not done a door card before; faster if you have.

  1. 1

    Disconnect the battery

    Pop the negative terminal off before opening the door card.

  2. 2

    Remove the factory door card

    Pop the trim, unscrew the visible Phillips screws, lift up and off the latch rod.

  3. 3

    Mount the speakers

    Drop your MBQuart speakers into the pod’s billet mesh grille mount and bolt them down with the supplied hardware.

  4. 4

    Plug the wiring kit in

    Snap the harness into the matching factory plug. No splicing on Plug n Play kits. DIY kit runs new wire through the door for vehicles without a factory plug.

  5. 5

    Wire the USB-C and puddle light

    Connect both to a switched 12V or auxiliary fuse. Auto-electrician can do this part in under an hour if you’re not comfortable.

  6. 6

    Bolt the pod to the door card

    Use the supplied mounting hardware. Pre-drilled holes line up with factory door card cutouts.

  7. 7

    Reinstall the door card

    Reverse step 2. Make sure the latch rod clicks back in.

  8. 8

    Reconnect and test

    Battery back on. Test speakers, USB-C, puddle lights, and door operation before the next door.

Watch the full step-by-step install video on our YouTube channel. Professional installation recommended if you have not removed a door card before.

Wichtige Hinweise

6×9″ speakers require cutting to fit

The front door pods fit standard 6.5″ speakers as supplied. 6×9″ speakers (or other larger aftermarket speakers) will require cutting at the front for the speaker to fit.

Speakers are not included in the pod price

Add an MBQuart pair from the bundle picker above and the wiring kit ships free, or skip and source your own (6.5″ or 6×9″ both fit).

USB-C and puddle lights need power

Both run off a switched 12V or auxiliary fuse. If you’re not comfortable with auto-electrical work, get an installer to do this part.

Plug n Play kits don’t work with factory electric mirrors

The Basic Plug n Play kit piggybacks off the factory mirror plug. If your truck has factory electric mirrors, the bundle picker auto-switches you to the DIY Plug n Play wiring kit.

Workmate, Troopy, Single Cab and 76 Wagon GXL 2024+

These trims ship with the DIY Plug n Play wiring kit because they don’t have a factory plug to piggyback off. The DIY kit includes everything to wire the speakers from scratch.

12-month warranty, AU-backed

AU stock, AU support. Anything fails inside the warranty window, contact PVS and we’ll sort it.

In the box.

Türverkleidungen für Frontlautsprecher mit Ablagefach

Front Door Pods

Mounting hardware

Mounting hardware

Buy direct from PVS.
Get the support to fit it with confidence.

PVS support and installation - door pods

When you buy directly from PVS Automotive, you get access to fitting guides, our Australian-based phone and email support, and the team that engineered the product. We help you pick the right wiring kit for your truck before you buy and answer install questions after the parts arrive.

Customer Reviews

Real feedback from door pod customers.

Looks fantastic, factory finish if not better. How Toyota should make them.

Matt E. - 79 Series Dual Cab owner

Awesome product. When they first arrived I knew they would be a perfect fit. Quality is exactly what I was looking for.

Nectarios K. - 76 Series Wagon owner

Well worth the wait for the new designs, and couldn’t ask more from a company willing to back its product. Bolt-up was clean, the USB-C is a game changer for road trips.

Matt T. - 79 Series Dual Cab owner, QLD

Great product, fits really well, exactly what I wanted. The puddle lights are a brilliant touch on dark camp ground entries.

Steve L. - 76 Series Wagon owner, VIC

Customer reviews.

Verified owner reviews from real PVS customers.