XL Pro LED Auxiliary Light Pod Pair Amber Drive/Combo, twin-pod kit with harness
The Baja Designs XL Pro auxiliary light pods push 4,095 raw lumens per light and throw 65 per cent further than the previous generation. You get a ready-to-mount two-light kit with the wiring harness and all mounting hardware in the box.
Thanks, your enquiry is with us. We will confirm current price, stock and lead time with the manufacturer and email you back. We have emailed a copy to . Reply to that email to add anything.
Item code: 507813
Australian Owned and Operated.Australian Owned Certified · AO 08314Built to outrun the darkness.
Baja Designs built the XL Pro around its trademarked high-speed spot reflectors and next-generation LED technology, pushing beam distance 65 per cent further than the previous generation. The Drive/Combo lens blends driving and spot optics so zones 1, 2 and 3 light up at once, giving you near-field coverage and long-distance reach from the one pod.
The amber Drive/Combo configuration suits dusty, foggy and wet conditions, where amber light cuts through scatter better than white. A built-in 20% dimming feature lets you dial back intensity when you need it, and CopperDrive technology keeps each LED running at 100% of its rated capacity so output stays consistent every time you switch on.
Every XL Pro is built to MoistureBlock standard: waterproof, rainproof and submersible. uService replaceable lenses and optics mean you can service the light rather than replace it if a lens takes a hit on the trail, keeping your long-term running costs down. The two-pod kit ships with all hardware and a wiring harness, so you can get straight to mounting.
What sets the XL Pro apart.
COPPERDRIVE
Each LED runs at 100% of its rated capacity, giving you the full 4,095 raw lumens per light with no derating.
MOISTUREBLOCK
Fully waterproof, rainproof and submersible construction keeps the internals protected whether you're crossing a river or driving through heavy rain.
USERVICE
Lenses and optics are field-replaceable, so a cracked lens on the trail is a parts swap, not a whole-unit replacement.
Installation overview.
CHOOSE YOUR MOUNT LOCATION
Pick a mounting point on your bull bar, roof rack, A-pillar or roll cage. The pods suit utes, vans, UTVs and motorcycles.
FIT THE MOUNTING HARDWARE
Use the included hardware to secure each pod bracket. Adjust the aim angle before you tighten fully.
CONNECT THE WIRING HARNESS
Route the included wiring harness to your power source and switch. The harness is pre-terminated and ready to connect.
AIM AND LOCK
With power connected, check the beam aim against the road or terrain, then lock the pods in position.
