XL Linkable LED Light Bar 4XL Clear, adjust every light and add more later
The Baja Designs XL Linkable is a fully customisable auxiliary lighting system built around the XL Sport shallow moto housing. You set it straight or arced, pitched or level, and add more lights when you're ready.
Thanks, your enquiry is with us. We will confirm current price, stock and lead time with the manufacturer and email you back. We have emailed a copy to . Reply to that email to add anything.
Item code: 740002
Australian Owned and Operated.Australian Owned Certified · AO 08314One system, endless configurations.
Most light bars lock you into one position and one layout. The Baja Designs XL Linkable does the opposite. Each light head gives you 45 degrees of vertical pitch, and every light moves on its own in the horizontal plane. So you can run a dead straight bar, or a swept arc that follows the curve of your bumper or roofline.
Inside is Baja Designs' next-generation LED technology, putting out 3,162 raw lumens per light at 5,000 K. That's natural daylight colour, and it cuts driver fatigue on long tracks and night stages. The Clear lens mixes wide cornering, driving combo and spot optics, so zones 1 through 4 all light up at once with a smooth blend.
Your wiring arrives fully crimped and trimmed from the factory, ready to connect out of the box. Black rock guards come with the kit to protect the housings when the lights aren't in use. The modular link design means you can add more lights later without rewiring the lot.
Built to be yours.
45° VERTICAL PITCH
Angle each light on its own, or tilt the whole bar as one unit, so you decide where the beam hits the ground.
INDEPENDENT HORIZONTAL ADJUSTMENT
Every light head moves on its own in the horizontal plane, so you can run a straight bar or an arc that hugs your vehicle's lines.
MULTI-ZONE CLEAR LENS
The Clear lens carries wide cornering, driving combo and spot optics in one unit, lighting zones 1 through 4 at once with a natural blend.
Installation overview.
SOURCE YOUR BRACKETS
Order the XL Linkable mounting brackets (part 748000) for your vehicle or mounting location before you start.
MOUNT AND POSITION
Bolt the light heads to the brackets. Set your horizontal layout, straight or arced, then dial in the 45-degree vertical pitch on each light.
CONNECT THE HARNESS
Plug in the factory-crimped and trimmed wiring harness (640115) that comes in the kit. Nothing cut or spliced in the standard four-light configuration.
FIT ROCK GUARDS
Clip the black rock guards over each light head when the lights aren't in use, so the lenses and optics survive the trail.
