Wireless Steering Wheel Controls Module Kit Plug and play steering control, no clock spring replacement
If your 70 Series LandCruiser left the factory without steering wheel controls, this wireless module adds them without touching the clock spring. It runs off the horn power circuit only, so the install stays clean, reversible and ADR compliant.
or 4 interest-free payments of $124.75 with Shop Pay & Afterpay
Item code: SWM-FACT-12
Australian Owned and Operated.Australian Owned Certified · AO 08314Why this module exists.
Every 70 Series LandCruiser built before the facelift left the factory without steering wheel controls. If you want them, the obvious path is to swap the clock spring for one with the right contacts. The clock spring is an essential part of the SRS airbag system, so PVS designed around it instead of replacing it.
This module is that alternative. It taps only into the horn power circuit, so you don't need to touch the clock spring, cut any factory wiring or build a custom loom. The result is a fully reversible install that works with the most popular aftermarket headunits on the market.
Select the headunit brand installed in your vehicle from the variant options above. Your kit is matched accordingly so the controls map correctly from the moment you plug in.
Built for a clean install.
NO CLOCK SPRING REPLACEMENT
The module operates entirely through the horn power circuit, so your factory clock spring stays in place. Your vehicle remains ADR compliant and roadworthy.
PLUG AND PLAY SETUP
No custom wiring loom and no dash surgery. The kit connects using existing circuits for a straightforward, reversible install.
BROAD HEADUNIT COMPATIBILITY
Select your headunit brand at checkout. The kit supports Factory Toyota Radio, Alpine, Pioneer, Kenwood, Sony, JVC, Android units, PVS, Polaris and Aerpro headunits.
Vehicle fitment.
Installation overview.
SELECT YOUR VARIANT
Choose the headunit brand installed in your vehicle before you start. The module is configured to match your selected headunit for correct button mapping.
CONNECT TO HORN CIRCUIT
The module draws power from the horn power circuit only. You don't need to modify the clock spring or factory steering column wiring.
CONNECT TO HEADUNIT
Plug the module into your aftermarket headunit using the appropriate interface connection. No custom loom needed.
TEST CONTROLS
Check each steering wheel control function works through your headunit before you refit any trim panels.
Check your wheel is 12-pin.
This module reads a 12-pin steering wheel control connector. Every genuine PVS 300 Series wheel is 12-pin, and so is a factory 200 Series facelift wheel. If the plug on the back of your wheel isn't 12-pin, it won't connect to this kit.
This catches people out. A lot of 200 and 300 Series style wheels sold through Marketplace and overseas sellers arrive with a 10-pin plug instead. Those wheels were built for a pre-facelift 200 Series or 150 Prado, which has a 10-pin clock spring and already has factory controls. They were never designed for a vehicle with no controls at all, which is what this module is for. Same looking wheel, wrong plug, and no amount of wiring at our end changes that.
So before you order, turn your wheel over and count the pins in the control plug. If you're not sure, send us a photo of the back of the wheel and we'll tell you straight away whether it'll work. We'd rather answer that question before you buy than after.
If the loom is cut. Cutting, splicing or re-pinning the harness is a modification, and once that's done the lifetime electronics warranty no longer applies and we can't support the wiring. We don't supply pin-outs, and we don't supply 12-pin to 10-pin conversion diagrams for wheels we didn't sell, because we don't hold the drawings for them. An unmodified kit can go back within 30 days.
What owners Say.
"Great stuff! Works like a charm. The tech support was very helpful as well. Keep up the good work!"
"Thanks for your help in getting the steering wheel working on my 79 series"
"Super easy to install, and works beautifully. Couldn’t ask for more 🤙"
