Winch Power Switch LED dash control
A factory-style blank fills with a clean, labelled, LED-backlit switch for your winch. Pick the fitment that matches your dash and it drops straight in.
or 4 interest-free payments of $4.75 with Shop Pay & Afterpay
Item code: SW70-VW-WNP
Australian Owned and Operated.Australian Owned Certified · AO 08314One switch, your
function.
The PVS Automotive Winch Power LED Push Switch fills a factory dash blank with a clean, labelled control for your winch. It's LED backlit and wires into your dash lighting, so it dims with the dash at night. It's shaped to suit your exact dash.
Generic rocker switches look like an afterthought. They sit proud of the dash, the labels fade, and the backlight never matches the factory globes. This switch is built to read as if Toyota fitted it: the correct blank shape for your dash, an etched WINCH legend, and a backlight tuned to the factory dimmer circuit.
Choose the fitment that matches your dash and it drops into the existing blank. Nothing cut, nothing modified.
Three things that matter.
FACTORY-MATCHED BACKLIGHT
The LED ties into your dash lighting circuit, so the WINCH legend lights with the rest of your dash and dims on the factory dimmer. No mismatched glow, no always-on glare at night.
OEM-STYLE BLANK FIT
Shaped to the exact blank in your dash, it seats flush and clips in like the factory item. No cutting, no filing. Take it out and the dash is untouched.
CLEARLY LABELLED CONTROL
An etched WINCH legend leaves no doubt which circuit you're switching. Rated for the load and built for daily use in a working 4WD.
Choose your dash.
Installation overview.
REMOVE THE BLANK
Pop the factory blank out of the dash position you want to use. It releases with light pressure from behind, or with a trim tool from the front.
WIRE THE SWITCH
Connect the switched output to your winch circuit and the LED to your dash lighting feed, so it dims with the dash. Use the supplied terminals.
CLICK IT IN
Seat the switch into the blank opening until it clips home. Test the function and the backlight, then refit any trim you removed.