Rock Sliders
Side bar and sill protection for the Jimny
The Salado kit treats the Jimny's side body as one protection and access zone. The tubular bar gives you a physical step, and the rocker panel plate shields the lower body from strikes and abrasion. The contour follows the Jimny's body curvature rather than a generic bolt-on shape, and separate 3-Door and 5-Door versions keep the proportions right across both wheelbases.
Item code: URN-SAL-RS-3D
In high demand. We're working through a backlog of orders on this range, so this item may dispatch one to two weeks later than usual.
12-Month Australian Warranty.Backed by PVS Automotive, Sydney based support. Tax Deductible for Business. GST claimable if you are registered.Often fully deductible as a business expense. Check with your accountant.
Australian Owned and Operated.Australian Owned Certified · AO 08314
Sill protection that earns its keep.
The Jimny's short wheelbase puts the lower body close to trail damage. Rocks, brush and debris strike at rocker panel height, and a lifted Jimny on larger tyres is harder to climb into.
The Salado kit treats the side of the body as one protection and access zone. The tubular bar gives you a step, and the rocker panel plate shields the lower body from strikes and abrasion. There's a separate version for the 3-door and the longer 5-door.
Built for real use.
TWO-PART ASSEMBLY
A tubular side bar with a step pad and brush protection, plus a rocker panel protection plate that shields the panel.
BODY-FLUSH CONTOUR
The side bar follows the curve of the body. It mounts in the original position with no chassis modification.
3-DOOR AND 5-DOOR VERSIONS
The 3-door JB74 version measures 1270 x 230 x 157 mm and weighs 27 kg. The 5-door JC74 version measures 1690 x 245 x 172 mm and weighs 32.6 kg. Choose your version at order.
Vehicle fitment.
Installation overview.
REMOVE THE SIDE SKIRTS
Remove the original side skirts. Work one side at a time, as the passenger side is identical to the driver's side.
MOUNT THE BRACKETS
Fit the front and rear sheet-metal brackets with the supplied hardware. Start all screws but don't tighten them yet.
FIT THE SIDE BAR
Mount the side bar main body onto the brackets and leave the screws loose.
ALIGN AND SECURE
Set the gap between the bar and the body, tighten the bracket screws first, then the main body screws. Keep the bar clear of the body.
Spec it
your way.
Not sure which setup suits your build? Get fitment advice, install guides, or talk to the PVS team before you buy. We are Sydney based and here to help.
