شحن مجاني على جميع الطلبات الأسترالية التي تزيد عن 150 دولارًا

Home · Jimny ·Instrument Cluster Face

Instrument Cluster Face
A fresh look for your Jimny

This gauge face is cut to match the Jimny cluster exactly, so it fits both 3-door and 5-door models in white or black.

Material 0.5 mm PC gloss / frosted finish
Finish White
Weight 0.022kg
Compat. 02JB74 / JC74
Fits the Jimny.
$179

Item code: URN-SAL-ICF-W3

Ask about this product

مجموعة العدادات URNA SALADO | جيمني

Year, model and series, if it changes the answer.
Prefer email? Write to info@pvsautomotive.com.au.

Thanks, your question is with us.

01
Design Notes

A fresh face for your Jimny.

You see your instrument cluster every time you get behind the wheel. If yours has faded or cracked, or you just want a different look, swapping the cluster face is one of the quickest interior upgrades you can make.

Urnieta's Jimny cluster faces are cut to match the original panel exactly, so your gauges, needles and warning lights all sit and read as they should. Choose white for a clean, modern contrast or black for a stealthy finish.

02

Designed to fit and last.

Each face is shaped for the Jimny instrument cluster, so it fits straightforward and looks factory correct.
Feature01

DIRECT FIT

Shaped to match the Jimny cluster housing exactly, covering both 3-door and 5-door variants.

Feature02

TWO FINISHES

Choose black or white to complement your interior trim or give it a point of difference.

Feature03

GAUGE CLARITY

Dial markings are precisely printed so every reading stays clear at a glance.

03

Vehicle fitment.

This cluster face comes in four variants, covering both body styles and both colours of the current Jimny range.
3-Door / 5-Door | Black / White
01 3-Door Jimny (White) Direct Fit
02 3-Door Jimny (Black) Direct Fit
03 5-Door Jimny (White) Direct Fit
04 5-Door Jimny (Black) Direct Fit
04

Installation overview.

Fitting a replacement cluster face is straightforward. You'll need only basic hand tools, and most people are done in well under an hour.
Basic tools required. No specialist equipment needed.
01

REMOVE THE CLUSTER

Disconnect the battery, then carefully remove the instrument cluster from the dash following your Jimny's service procedure.

02

SWAP THE FACE

Separate the cluster housing and swap the original face for your chosen Urnieta replacement, aligning it to the housing correctly.

03

REASSEMBLE

Refit the cluster housing, reinstall the cluster into the dash, reconnect the battery and check all gauges and warning lights work normally.

Next step

Spec it
your way.

Not sure which setup suits your build? Get fitment advice, install guides, or talk to the PVS team before you buy. We are Sydney based and here to help.