Squadron Sport Black LED Auxiliary Light Pod Pair Clear spot beam, 30W per pair
The Baja Designs Squadron Sport packs serious LED output into a compact 3 inch pod, so you can fit it almost anywhere on a ute, Jeep, SUV, UTV or any other vehicle that needs extra light where it counts.
Thanks, your enquiry is with us. We will confirm current price, stock and lead time with the manufacturer and email you back. We have emailed a copy to . Reply to that email to add anything.
Item code: 557801
Australian Owned and Operated.Australian Owned Certified · AO 08314Big light in a small package.
At just 3 inches, the Squadron Sport fits the tight spots bigger light bars can't reach. The gloss black aluminium housing looks sharp on any build, and the next-generation LEDs inside deliver 3,162 lumens at just 30 watts.
Baja Designs backs every Squadron Sport with its Limited Lifetime Warranty and a 30-Day Money Back Guarantee. The uService programme means you can replace the lenses and optics down the track, so your pods keep working long after fitment.
Built for the real world.
MOISTUREBLOCK
Fully waterproof, rain-proof and submersible, so these pods keep working through creek crossings, heavy rain and dusty outback conditions.
COPPERDRIVE
Every LED runs at 100 per cent capacity, so you get maximum output and reliability from each diode without sacrificing longevity.
5000K DAYLIGHT OUTPUT
The natural 5000K colour temperature cuts driver fatigue on long night drives and shows the road and terrain in true colour.
Installation overview.
CHOOSE YOUR MOUNT LOCATION
Pick a solid mounting point such as a bull bar, A-pillar bracket or roof rack rail. The small footprint gives you flexibility bigger bars can't match.
BOLT THE PODS
Use the included mounting hardware to secure both Squadron Sport pods firmly. Aim the housings at your intended beam zone before you fully tighten them.
CONNECT THE WIRING HARNESS
Route the included harness (640117) to your switch or fuse box, keeping the wiring clear of heat sources and moving parts. Plug the pods in and secure any excess cable.
TEST AND ADJUST
Power on and check your beam aim. Loosen the mounting hardware slightly to fine-tune the angle, then re-torque and you're ready to go.
