Squadron Sport Black LED Pod Pair Amber spot, compact 3" auxiliary lighting
The Baja Designs Squadron Sport LED Pod Pair packs serious auxiliary lighting into a compact 3 inch housing. You get 3,162 lumens at just 30 watts, with a focused amber spot beam.
Thanks, your enquiry is with us. We will confirm current price, stock and lead time with the manufacturer and email you back. We have emailed a copy to . Reply to that email to add anything.
Item code: 557811
Australian Owned and Operated.Australian Owned Certified · AO 08314Big output, small footprint.
At just 3 inches across, the Squadron Sport pods fit almost anywhere on your 4WD, ute, Jeep, SUV or UTV. Tight A-pillar mounts, bull bars, roof racks and underbody positions are all fair game. The slim gloss black aluminium housing looks the part wherever it sits.
Baja Designs drives these pods at 100 percent output with CopperDrive technology, so you get consistent, full-power light every time you flick the switch. MoistureBlock sealing keeps water out, whether you're crossing a creek or driving through heavy rain.
The amber spot beam cuts through dust, fog and rain, where a clear white light can cause glare and wash-out. Each pair ships with a wiring harness and all the mounting hardware you need, so you can get them fitted without a separate trip to the auto shop.
Built-in Baja technology.
COPPERDRIVE
LEDs run at 100 percent capacity at all times, giving you maximum output and consistent performance across the life of the pod.
MOISTUREBLOCK
The fully sealed housing is waterproof, rainproof and submersible, keeping moisture out in the harshest off-road and weather conditions.
CLEARVIEW OPTICS
Precision optics put all usable light exactly where you need it, cutting spill and maximising effective beam distance.
Installation overview.
CHOOSE YOUR MOUNT LOCATION
The compact 3" housing suits bull bars, A-pillars, roof racks, bumpers and most other mounting positions on utes, Jeeps, SUVs and UTVs.
MOUNT THE PODS
Use the included mounting hardware to secure both pods to your chosen location. Adjust aim before you fully tighten them.
CONNECT THE WIRING HARNESS
Run the included harness 640117 from the pods to your power source. The harness is ready to go straight out of the box.
AIM AND TEST
Power up, check beam aim and alignment, then tighten all fasteners to finish the install.
