RGB Bi-LED Headlights App-controlled projector upgrade for the 70 Series, 2023+
Your 70 Series LandCruiser got a new front end in 2023, and this Bi-LED projector headlight was built to match it. You get a sharper beam, a cleaner white DRL and full RGB styling control from your phone over Bluetooth.
or 4 interest-free payments of $324.75 with Shop Pay & Afterpay
Item code: LC70-FL-HL
Australian Owned and Operated.Australian Owned Certified · AO 08314More light, more personality.
Your 2023+ LandCruiser 70 Series got a new front end, and these headlights were designed to match it. They plug straight into your factory wiring, sit on the factory mounting points, and need no cutting or body modifications. You get a clean, factory-quality install that takes 30 to 60 minutes per pair with hand tools.
A Bi-LED projector handles the driving side, running a sharp, white low and high beam. Your DRL signature stays white no matter what. The styling features, an RGB Demon Eye in the projector barrel and an RGB accent ring inside the housing, are set through a Bluetooth app on your phone. Pick a static colour, run a preset mode, or switch the RGB off and run them as straight Bi-LED projectors.
Sealed housings, UV-stable lenses and vibration-dampened internal mounts keep everything in order whether you're on the highway, on tour or covering rough ground. It's backed by a 12-month warranty with local Australian phone support.
Everything in the one housing.
BI-LED PROJECTOR BEAM
A dedicated Bi-LED projector handles both your low and high beam, giving you a sharper, whiter output than the factory halogen or LED reflector units.
WHITE DRL SIGNATURE
A clean white daytime running light runs continuously with your ignition. It stays white no matter what RGB mode you pick.
RGB DEMON EYE
An RGB ring sits inside the projector barrel. Set any colour or cycle through preset modes from the Bluetooth app. Your driving beam isn't affected.
Vehicle fitment.
Installation overview.
REMOVE FACTORY UNITS
Disconnect the factory wiring connector and remove the OEM headlight from the factory mounting points.
FIT THE NEW HEADLIGHT
Seat the replacement unit onto the factory mounting points and secure it with the original hardware.
CONNECT THE FACTORY PLUG
Plug the factory wiring connector straight into the new headlight. No adapter or relay kit needed.
PAIR THE APP
Download the companion app on iOS or Android, pair over Bluetooth, and set your preferred RGB colours or modes.