LP9 Sport LED Auxiliary Light Pod
Spot beam, amber. Full-size output, contemporary design.
The Baja Designs LP9 Sport is a full-size auxiliary LED light pod that packs serious technology into a clean, modern package. With 9,421 lumens from its forward-projecting LEDs and a 200-degree spread courtesy of Integrated Peripheral Technology, it delivers usable light well beyond the centreline of your beam.
Item code: 350011
FREE delivery, Australia-wide
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Built for the full picture.
Most auxiliary lights flood the road ahead and leave the periphery dark. The LP9 Sport solves that with Integrated Peripheral Technology (IPT), adding six dedicated LEDs that push usable light out to a full 200-degree spread. You see the edge of the track, the animal off to the side, and the drop-off at the corner, not just what is straight in front of you.
Direct Ducted Cooling keeps the internals at the right temperature when the light is working hard in the bush, on the dunes, or on a long night drive. The MoistureBlock housing is waterproof, rainproof and submersible, so conditions are rarely a concern. CopperDrive ensures every LED is driven at 100 percent for consistent, reliable output.
The uService system means the lens pattern and colour can be swapped out in the field without sending the light away. This amber spot variant is ready to cut through dust and fog where a white beam falls short. Note that the LP9 Sport runs a simple on/off function and does not include the amber backlit feature, that is available on the LP9 Pro and Racer Editions.
What sets the LP9 Sport apart.
INTEGRATED PERIPHERAL TECHNOLOGY (IPT)
Six dedicated peripheral LEDs extend usable light to a 200-degree spread, illuminating the sides of the trail where standard forward-only lights leave blind spots.
DIRECT DUCTED COOLING
Internal airflow channels actively manage heat under sustained use, keeping performance consistent during long stints of hard off-road driving.
uSERVICE
Lenses and optics are user-replaceable in the field. Swap beam patterns or refresh worn lenses without tools or trips to a workshop.
Installation overview.
CHOOSE YOUR MOUNT POINT
Select a solid mounting location, bull bar tabs, A-pillar pods, roof rack rails or a dedicated driving light bracket. Ensure the chosen position allows the beam to clear the bonnet line.
SECURE THE POD
Attach the LP9 Sport using the supplied hardware. Tighten fasteners firmly and adjust the aim angle before final tightening.
WIRE TO A SWITCHED CIRCUIT
Run wiring through a quality relay and fuse to a switched 12V source or a dedicated switch panel. The LP9 Sport operates on a simple on/off circuit, no hi/lo wiring required.
AIM AND TEST
Power the light and adjust the aim on a flat surface. Confirm the beam pattern suits your intended use before heading out.