LP6 Pro LED Auxiliary Light Pod
Spot beam, clear lens
The Baja Designs LP6 Pro is a 6-inch auxiliary LED pod delivering 11,225 lumens with a dedicated 8-degree spot beam, built for serious distance lighting on the trail or road.
Item code: 270001
FREE delivery, Australia-wide
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Built for distance, engineered to last.
The LP6 Pro is Baja Designs' six-inch auxiliary pod done properly. Integrated Peripheral Technology (IPT) spreads usable LED light across a full 200-degree arc, meaning less wasted output and more of what matters pointed at the trail ahead. The 8-degree spot beam is the longest and narrowest pattern in the LP6 range, purpose-built to punch light deep down the track when paired with wider cornering or driving lights in Lighting Zones 4 and 5.
Direct Ducted Cooling channels air efficiently over the rear heat sinks, keeping the LEDs running at full capacity without compromise. CopperDrive technology drives the LEDs at 100% safely, while 5000K daylight colour temperature reduces driver fatigue and renders the terrain in natural colour. MoistureBlock sealing keeps water, rain and submersion from ever becoming a concern.
The LP6 Pro also runs coloured daytime running, low-power and high-power modes, giving you genuine versatility on and off the trail. Replaceable lenses and optics via the uService programme mean this light is serviceable long-term, backed by a Limited Lifetime Warranty and a 30-day money-back guarantee.
Why the LP6 Pro leads the pack.
11,225 LUMENS
Massive usable output from a compact 6-inch pod, spread across a 200-degree arc via Integrated Peripheral Technology (IPT).
8-DEGREE SPOT BEAM
A long, narrow beam pattern that throws light deep down the trail or road, ideal as part of a multi-zone lighting setup.
DIRECT DUCTED COOLING
DDC technology circulates air directly over the rear heat sinks for sustained, efficient thermal management at full power.
Installation overview.
CHOOSE YOUR POSITION
Select a mounting location on your bull bar, roof rack or A-pillar bracket that places the pod in the correct lighting zone for your setup. The spot beam is best suited to Zones 4 and 5 for distance lighting.
MOUNT THE POD
Attach the LP6 Pro to your bracket using the supplied hardware. Adjust the aim angle before fully tightening so the beam is directed straight down the trail.
WIRE TO POWER
Run wiring to a suitable relay or switch panel. The LP6 Pro supports multiple power modes, so ensure your loom and switch gear are rated for the load.
AIM AND TEST
Power up and verify beam aim with the vehicle on level ground. Adjust as needed, then lock off the mount hardware and dress the wiring.