LP6 Pro LED Auxiliary Light Pod
Spot beam, Amber backlight
The Baja Designs LP6 Pro is a 6-inch auxiliary LED pod delivering 11,225 lumens through Integrated Peripheral Technology, with an 8-degree spot beam built for serious distance illumination on the trail or road.
Item code: 270011
FREE delivery, Australia-wide
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Distance light, done properly.
Most auxiliary lights are a compromise. The LP6 Pro Spot is not. Its tight 8-degree beam throws light further down the trail or road than wider-pattern pods, making it the natural partner for driving or combo lights already covering near-field and cornering zones. Run it in Lighting Zone 4 or 5 and you fill the gap between your existing setup and the horizon.
Baja Designs engineered the LP6 Pro around two core technologies. Integrated Peripheral Technology (IPT) spreads usable light across a full 200-degree arc, so you get output where it counts rather than wasteful hot spots. Direct Ducted Cooling (DDC) channels air over the rear heat sinks, keeping thermals in check and the LEDs running at full capacity via CopperDrive.
Three power modes, coloured daytime running light, and a 5000K daylight colour temperature round out a light that is as practical in daily use as it is capable on a night run. The amber backlight lets you add a clean, customised look for shows or photo shoots, while replaceable lenses and optics through the uService programme mean the LP6 Pro is built to last the life of your vehicle.
Built around real technology.
11,225 LUMENS VIA IPT
Integrated Peripheral Technology delivers a 200-degree spread of usable LED light, maximising output across the full field rather than concentrating it in a narrow hot spot.
8-DEGREE SPOT BEAM
The long, narrow spot pattern throws light deep down the trail or road, ideal for pairing with driving or combo pods already handling near-field and cornering duties.
DIRECT DUCTED COOLING
DDC channels airflow directly over the rear heat sinks to manage thermals efficiently, letting CopperDrive run the LEDs safely at 100% output.
Installation overview.
CHOOSE YOUR POSITION
Select a mounting location within Lighting Zone 4 or 5 (typically bull bar, roof rack or A-pillar) to complement your existing near-field and cornering lights.
MOUNT THE POD
Secure the LP6 Pro using the supplied hardware. Ensure the mount is solid and the beam angle can be adjusted to aim accurately down the trail or road.
WIRE AND SWITCH
Run wiring through a suitable relay and fuse to your power source and connect to your chosen switch or wiring harness. Consult a licensed auto-electrician if you are unsure.
AIM AND TEST
Power on the light and adjust the aim before tightening the mount fully. Verify all three modes, including the amber daytime running light, are functioning correctly.