LP6 Pro LED Auxiliary Light Pod
Driving/Combo, Clear
The Baja Designs LP6 Pro is a 6-inch auxiliary LED pod delivering 11,225 lumens across a 200-degree spread of usable light, with multiple power modes and Baja Designs' own Integrated Peripheral Technology for unmatched trail and road coverage.
Item code: 270003
FREE delivery, Australia-wide
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Maximum coverage, built to last.
The LP6 Pro's Driving/Combo beam blends a 42-degree driving optic with an 8-degree spot optic in a single pod, giving you both near-field spread and long-distance reach at the same time. Whether you're threading tight bush tracks or pushing pace on an open dirt road, the LP6 Pro covers both without compromise.
Baja Designs' Direct Ducted Cooling channels air directly over the rear heat sinks, keeping the LEDs running efficiently and safely at full output for extended periods. CopperDrive technology drives the LEDs at 100% rated power, and MoistureBlock sealing means the pod is fully waterproof and submersible. The 5000K daylight colour temperature reduces driver fatigue and renders colour accurately after dark.
The LP6 Pro runs three modes: coloured daytime running light, low power, and high power, so you can match output to conditions. Lenses and optics are user-replaceable through Baja Designs' uService programme, and the pod is backed by a Limited Lifetime Warranty and a 30-day money-back guarantee.
Why the LP6 Pro is the benchmark.
IPT OPTICS
Integrated Peripheral Technology delivers a full 200-degree spread of usable LED light, eliminating the dark edges and hotspots common in standard reflector pods.
DIRECT DUCTED COOLING
DDC channels airflow directly over the rear heat sinks, managing thermal load during sustained high-power use on long off-road stages.
THREE LIGHT MODES
Switch between coloured DRL, low power, and high power to suit the situation, from slow crawling tracks to full-pace night driving.
Installation overview.
CHOOSE YOUR MOUNT POSITION
Select a mount point on your bull bar, roof rack or A-pillar bracket that gives the LP6 Pro a clear, unobstructed beam path. Confirm there is clearance behind the mount for the pod body and wiring loom.
FIT THE MOUNTING HARDWARE
Attach the supplied mounting bracket to your chosen position. Torque fasteners to the bracket manufacturer's specification and check the pod can be aimed vertically and horizontally before locking it down.
RUN AND CONNECT WIRING
Route the wiring loom away from heat sources and moving parts, securing with cable ties at regular intervals. Connect to a quality relay harness or the Baja Designs wiring harness for the cleanest and safest installation.
AIM AND TEST
With power connected, cycle through DRL, low, and high modes to confirm operation. Aim the pod to your desired beam angle, then lock the mount hardware and recheck aim after the first off-road run.