LP4 Pro LED Auxiliary Light Pod Pair
Spot beam, clear lens
The Baja Designs LP4 Pro is the most compact light in the LP series, delivering 8,857 total lumens with Integrated Peripheral Technology and Direct Ducted Cooling in a compact auxiliary pod package. Sold as a pair.
Item code: 297801
FREE delivery, Australia-wide
Shopping for work? You could claim up to 30% for tax purposes on your business order. Terms and conditions apply. Please check with your accountant.
Big output, small package.
The LP4 Pro sits at the compact end of the Baja Designs LP lineup, but it carries every technology found in the larger siblings. Integrated Peripheral Technology (IPT) spreads usable light across a full 200-degree arc, so you get 6,885 lumens pushing forward down the track and another 1,972 lumens lighting up the edges of your field of view. That peripheral coverage makes a genuine difference when navigating tight bush tracks or scanning roadsides for hazards.
Thermal management is handled by Baja Designs' Direct Ducted Cooling (DDC), which channels airflow directly over the rear heat sinks to keep operating temperatures in check and maintain consistent output over long runs. CopperDrive technology drives the LEDs at a full 100 percent safely, and the 5,000K colour temperature keeps the light natural and close to daylight, reducing driver fatigue on extended trips.
The LP4 Pro also supports optional red, blue or green backlight personalisation for show and exhibition use. Note that coloured backlights are intended exclusively for off-road exhibition use and must not be used on public roads.
Built-in technology.
IPT PERIPHERAL LIGHTING
Integrated Peripheral Technology delivers 1,972 lumens of dedicated side illumination across a 200-degree spread, adding critical coverage beyond the central beam.
DIRECT DUCTED COOLING
DDC technology channels airflow efficiently over the rear heat sinks, boosting cooling capacity and sustaining peak output during extended use.
COPPERDRIVE
Proprietary CopperDrive circuitry drives each LED at 100 percent of rated output safely, maximising brightness without compromising reliability.
Installation overview.
CHOOSE YOUR MOUNT POINT
Select a rigid mounting location such as a bull bar, roof rack rail or A-pillar bracket that provides a clear forward field of view and adequate airflow around the housing for DDC cooling.
SECURE THE PODS
Attach each pod using the supplied hardware, ensuring the mounting surface is solid and the pods are oriented correctly for your intended beam direction.
WIRE AND CONNECT
Run wiring back to your switch or relay harness. Baja Designs wiring harnesses are available separately and are recommended for a clean, protected installation.
AIM AND TEST
With the vehicle on level ground, adjust the pod angle to suit your preferred beam throw. Power on and verify both pods are functioning before heading out.