XL Linkable LED Light Bar 5XL Clear, fully configurable, forward-projecting performance
The Baja Designs XL Linkable LED Light Bar is built around the XL Sport shallow moto housing, so you can build a completely custom setup. Each light delivers 3,162 raw lumens across up to eight independently adjustable pods.
Thanks, your enquiry is with us. We will confirm current price, stock and lead time with the manufacturer and email you back. We have emailed a copy to . Reply to that email to add anything.
Item code: 740003
Australisches Eigentum, australisch geführt.Australian Owned Certified · AO 08314One bar, endless configurations.
Most light bars lock you into a fixed layout the moment you bolt them on. The XL Linkable is different. Every pod carries 45 degrees of vertical pitch adjustment, on its own or across the whole bar at once, so you can dial in your beam precisely with no shimming and no guessing.
Independent horizontal adjustment per light means you can run the bar dead straight to match a flat bumper, or sweep it into a gentle arc that follows your roofline. The system starts at three lights and expands to eight, and because the wiring comes fully crimped and trimmed, adding links later is straightforward.
Baja Designs spec each pod with next-generation LEDs running at 5000K daylight colour temperature, lighting up zones 1 through 4 at once through wide cornering, driving combo and spot lenses for a smooth, blended field of light. Black rock guards are included to protect the optics when the lights aren't in use, and the harness (640115) comes in the box ready to connect.
Built for performance and flexibility.
45° VERTICAL PITCH
Each light adjusts through 45 degrees of vertical pitch on its own or as a complete unit, so you can fine-tune beam placement on any vehicle or mount.
INDEPENDENT HORIZONTAL ADJUST
Set every pod at its own horizontal angle to create a straight bar or a custom arc that follows the exact lines of your bumper or roofline.
MULTI-ZONE ILLUMINATION
Wide cornering, driving combo and spot lenses light up zones 1, 2, 3 and 4 at once for a smooth, shadow-free blend across the full spread.
Installation overview.
SOURCE BRACKETS
Confirm the correct mounting bracket for your application. The XL Linkable mounting bracket (748000) isn't included and needs to be ordered separately before you start installation.
MOUNT AND CONFIGURE
Attach the bracket to your bumper or roofline, then mount each light pod. Set horizontal angles per pod to suit a straight or arc layout before locking off.
AIM THE BEAM
Use the 45-degree vertical pitch adjustment on each light individually, or sweep the whole unit at once, to direct output exactly where you need it.
CONNECT THE HARNESS
Connect the included harness (640115). Wiring is pre-crimped and trimmed, so there's no cutting or splicing needed. Route and secure all cables away from heat and moving parts.
FIT ROCK GUARDS
Clip the included black rock guards over the lights whenever your vehicle is parked or the lights aren't in use, to protect the lenses and optics.
