Kostenloser Versand für alle australischen Bestellungen über 150 $
Home · Jimny ·Roof Console Kit
URNIETA SALADO Dachkonsole-Kit | Jimny

Roof Console Kit
Overhead controls for the Jimny JB74 and JC74

The URNIETA Salado Roof Console Kit turns the unused space above the windscreen into an overhead cockpit zone for the Jimny JB74 and JC74. It groups switch control, dimming, storage, radio output, tinted visor function and camera or tablet expansion within easy reach.

Material ABS / Aluminium-Magnesium Alloy / Stainless Iron
Finish Black
Weight 8 kg
Compat. 02JB74 / JC74
Fits the Jimny.
$1,899

Item code: URN-SAL-RC-3D

Dispatches within two to three weeks.Cancel free within 48 hours of ordering. After that your order has been placed with Urnieta, so we complete it and dispatch it to you as ordered.Free delivery, Australia-wide.

In high demand. We're working through a backlog of orders on this range, so this item may dispatch one to two weeks later than usual.

12-Month Australian Warranty.Backed by PVS Automotive, Sydney based support. Tax Deductible for Business. GST claimable if you are registered.Often fully deductible as a business expense. Check with your accountant. Australian Owned CertifiedAustralian Owned and Operated.Australian Owned Certified · AO 08314

Ask about this product

URNIETA SALADO Dachkonsole-Kit | Jimny

Year, model and series, if it changes the answer.

Thanks, your question is with us.
Download Instruction Manual
URNIETA SALADO Dachkonsole-Kit | Jimny
URNIETA SALADO Dachkonsole-Kit | Jimny
URNIETA SALADO Dachkonsole-Kit | Jimny
01
Design Notes

Overhead space, put to work.

Add fighter-aircraft-style overhead controls to your Suzuki Jimny with the Urnieta Salado roof console kit. It's compatible with the 3-door (JB74) and 5-door (JC74), and the main housing colour matches the Jimny roof.

The vertical panel carries switches, a dimmer and storage. The horizontal assembly adds an integrated radio speaker, tinted sun visors and storage.

02

Built for the Jimny cabin.

Two panels, an expansion rail and radio compatibility, with separate fitments for the 3-door and 5-door.
Feature01

DUAL ASSEMBLY

A vertical panel with switches, dimmer and storage, plus a horizontal panel with radio speaker, sun visor and storage.

Feature02

EXPANSION RAIL READY

First-person camera mounting, tablet holders and accessory expansion.

Feature03

RADIO READY

Compatible with Yaesu, Kenwood, Icom and Motorola radios. Comes with UHF radio inserts cut for the Yaesu FTM-6000R, Icom IC-2730 and Yaesu FTM-500D, or the opening can be left open. No radio included.

03

Vehicle fitment.

This kit comes in two fitments, the 3-door (JB74) and the 5-door (JC74). Select your variant when ordering.
3-Door / 5-Door
01 JB74 Suzuki Jimny Sierra JB74 (3-Door) 2018-Present Direct Fit →
02 JC74 Suzuki Jimny Nomad JC74 (5-Door) 2023-Present Direct Fit →
04

Installation overview.

Installation should be completed by a qualified workshop using the supplied hardware and current installation documentation.
Workshop install
01

PREPARE VEHICLE

Remove the original sun visors, sun visor clips, and the front reading light and switch.

02

MOUNT BRACKETS

Fit the support brackets, then the sun visor front bracket, the rearview mirror with speaker bracket, the main bracket and the ACC cover. Start all screws without fully tightening them, so you can adjust later.

03

FIT HOUSING AND WIRE

Install the sun visor box body, adjust the brackets into position, tighten them and refit the rearview mirror. Mount the radio panel and route the wiring, leaving 30 cm of the console and panel harness, red to ACC and black to negative.

04

MOUNT CONSOLE

Mount the console on its rails for the 3-door, or with the 5-door mounting plate for the 5-door. Clip the edge trim into the side gap and tighten all screws.

05

UHF radio inserts.

The console comes with UHF radio inserts cut for different radios, or you can leave the opening open. No radio included. The openings are the same on every URNIETA roof console, so the inserts interchange. Measure your radio's control head against these before you order.
PART · UHF radio insertsUNITS · MMSCALE · All three to one scaleVIEW · Face of insert
Yaesu FTM-6000R insertThe opening is 142.0 mm wide by 41.5 mm high. Drawn to scale with a 50 mm scale bar.142.041.5OPENING050 MM
Yaesu FTM-6000ROpening 142.0 x 41.5 mm
Icom IC-2730 insertThe opening is 150.6 mm wide by 50.7 mm high. Drawn to scale with a 50 mm scale bar.150.650.7OPENING050 MM
Icom IC-2730Opening 150.6 x 50.7 mm
Yaesu FTM-500D insertThe opening is 157.8 mm wide by 62.3 mm high across the middle and 56.4 mm at the ends. Drawn to scale with a 50 mm scale bar.157.856.462.3OPENING050 MM
Yaesu FTM-500DOpening 157.8 x 62.3 mm, 56.4 mm at the ends

Openings only, drawn square. Corner radii and the insert outer size aren't shown. The step on the FTM-500D opening is drawn to the supplier drawing and isn't dimensioned.

Yaesu FTM-6000R
142.0 x 41.5Millimetres. The control head is 140 x 40.5 x 35 mm.
Icom IC-2730
150.6 x 50.7Millimetres. The control head is 150 x 50 x 27.2 mm.
Yaesu FTM-500D
157.8 x 62.3Millimetres, stepped: 62.3 mm tall across the middle and 56.4 mm at the ends. The control head is 156 x 64 x 59 mm.
Depth behind the insert
59 mmThe FTM-500D head is the deepest of the three and mounts on a supplied bracket.
Next step

Spec it
your way.

Not sure which setup suits your build? Get fitment advice, install guides, or talk to the PVS team before you buy. We are Sydney based and here to help.

01Talk to our teamBuild and fitment advice→ 02Install guidesStep by step support→ 03Warranty and supportBacked by PVS→ 04Shop the rangeMore for your Jimny→