UHF Radio LED Push Switch Factory-style dash fitment for LandCruiser & Hilux
This UHF radio push switch drops straight into your Toyota's factory switch panel. White LED illumination and an OEM-matched finish mean it looks like it was always there.
or 4 interest-free payments of $4.75 with Shop Pay & Afterpay
Item code: SW70-VW-UHF
Australisches Eigentum, australisch geführt.Australian Owned Certified · AO 08314No cutting, no compromise.
Fitting a UHF radio is one of the first upgrades most LandCruiser and Hilux owners make, but running a bare toggle switch through the dash or velcro-mounting a remote head never looks the part. This switch fills the factory blanking position cleanly, keeping your interior looking stock and giving you a dedicated, labelled control right where you need it.
The white LED backlighting matches the surrounding factory switches at night, so you won't get mismatched colours or an orphaned glow on the panel. Each switch arrives pre-wired, so you can fit it without cutting into your factory loom.
Pick the fitment that matches your panel orientation and model below. Options cover the 70 Series in vertical and horizontal configurations, the 70 Series Facelift square panel, and the shared 200 Series and Hilux N80 panel format.
Built for the factory panel.
DIRECT FIT
Drops into the factory switch panel blanking position with nothing cut and nothing modified. Pick your vehicle variant and it fits first time.
WHITE LED ILLUMINATION
Backlit with a white LED that matches your factory instrument lighting, so your switch panel looks consistent day and night.
OEM-STYLE FINISH
The face and labelling mirror Toyota's factory switch look, so the UHF switch blends in instead of standing out as an afterthought.
Vehicle fitment.
Installation overview.
SELECT YOUR VARIANT
Confirm your switch panel orientation before you order. Check whether your 70 Series dash takes a vertical, horizontal, or square (Facelift) switch, or whether you have a 200 Series or Hilux N80 panel.
REMOVE THE BLANK
Pop out the factory blanking plug from the switch position in your dash panel. Nothing to cut or trim.
CONNECT AND CLIP IN
Connect the pre-wired harness to your UHF radio switched output, then press the switch firmly into the panel opening until it clicks flush. Test the LED and you're done.