Squadron Sport Black Flush Mount LED Pod Driving/combo clear auxiliary light
The Baja Designs Squadron Sport Black Flush Mount is a compact LED auxiliary light pod with a driving/combo clear beam pattern. Built for off-road, overland and touring use, it gives you serious illumination in a clean, flush-mounted package.
Thanks, your enquiry is with us. We will confirm current price, stock and lead time with the manufacturer and email you back. We have emailed a copy to . Reply to that email to add anything.
Item code: 551003
Australisches Eigentum, australisch geführt.Australian Owned Certified · AO 08314Built for the track ahead.
Baja Designs has built its reputation on lighting that holds up in the toughest off-road conditions on the planet. The Squadron Sport Black Flush Mount carries that same pedigree in a compact pod, giving you a clean, low-profile install without giving up output.
The driving/combo clear beam pattern balances a tight, long-range throw with a wider spread, so it works equally well on fast open tracks or tight bush trails. The black housing sits flush into bumpers, bull bars and light mounts for a factory-clean finish.
Whether you're setting up a touring rig for remote Australia or building a dedicated off-road vehicle, this Squadron Sport pod is a straightforward, reliable upgrade to your forward lighting.
Squadron Sport features.
DRIVING/COMBO BEAM
The clear driving/combo beam pattern blends long-range throw with lateral spread, so you get confident visibility across a wide range of off-road conditions.
FLUSH MOUNT DESIGN
The flush mount housing sits tight against your mounting surface, giving you a clean, low-profile look that integrates neatly with bumpers and bull bars.
BLACK HOUSING
The blacked-out housing cuts glare reflection off the pod itself and suits the look of modern 4WD and overland builds.
Installation overview.
CHOOSE YOUR MOUNT LOCATION
Find a suitable spot on your bull bar, bumper or A-pillar bracket. The flush mount design suits flat or recessed surfaces for a tidy finish.
SECURE THE POD
Bolt the pod firmly to your chosen mount with appropriate hardware. Make sure the housing sits level and the beam angle points where you need it.
WIRE TO POWER
Run wiring from the pod back to your switch or relay. Use a relay and fuse rated for auxiliary lighting to protect your vehicle's electrical system.
AIM AND TEST
Power up the light and check the beam direction. Adjust the mounting angle as needed before you fully tighten the fasteners.
