Squadron Pro Black LED Auxiliary Light Pod Pair Amber spot beam, compact 3" pods
The Baja Designs Squadron Pro packs serious output into a compact 3" pod. This pair comes in a gloss black aluminium housing with an amber spot beam, ready to mount almost anywhere on your 4WD, ute, UTV or SUV.
Thanks, your enquiry is with us. We will confirm current price, stock and lead time with the manufacturer and email you back. We have emailed a copy to . Reply to that email to add anything.
Item code: 497811
Australisches Eigentum, australisch geführt.Australian Owned Certified · AO 08314Big output, small package.
The Squadron Pro proves auxiliary lighting doesn't need bulk to work hard. At just 3 inches, these pods tuck onto a bull bar, A-pillar, roof rack, UTV cage or anywhere else you need light pointed down the road or trail, without cluttering your build.
Baja Designs drives these pods with next-generation LEDs at 100 per cent through CopperDrive technology, pushing out 4,095 lumens across the pair. The 5000K daylight colour temperature keeps the scene looking natural and cuts driver fatigue on long nights behind the wheel.
Every set ships with a wiring harness and all the mounting hardware you need, so you can get them fitted and lit without a trip to the hardware store. Backed by Baja Designs' Limited Lifetime Warranty and a 30-day satisfaction guarantee.
Built to perform.
COPPERDRIVE
LEDs run at 100 per cent capacity for maximum output and consistent performance across the life of the light.
MOISTUREBLOCK
Waterproof, rain-proof and submersible construction keeps the internals protected no matter what the track throws at you.
USERVICE
Replaceable lenses and optics mean you can service and refresh the pods in the field rather than replacing the whole unit.
Installation overview.
CHOOSE YOUR MOUNT POINT
Pick a spot such as a bull bar, A-pillar bracket, roof rack rail or UTV cage. The compact 3" housing gives you plenty of flexibility.
FIT THE MOUNTING HARDWARE
Use the included hardware to secure the pods firmly to your chosen surface. Set the beam angle before you fully tighten it.
CONNECT THE WIRING HARNESS
Run the included harness (640117) to your switch or relay. Route cables away from heat sources and sharp edges, securing with ties as you go.
TEST AND ADJUST
Power up and check beam alignment. Adjust the pod angle to dial in your spot beam exactly where you need it.
