Slim Line Weather Shields For the 76, 78 & 79 Series LandCruiser
Crack a window in the rain and you get wet. These shields let the air in and keep the rain, wind noise and glare out of your 76, 78 or 79 Series, and at 2.5mm they're thicker than the 1.5mm shields most shops sell.
or 4 interest-free payments of $22.25 with Shop Pay & Afterpay
Item code: LC70-WS-2DR
Australisches Eigentum, australisch geführt.Australian Owned Certified · AO 08314Why thickness actually matters.
Most weather shields on the market are moulded at 1.5mm. That's thin enough to flex under highway wind, crack on a cold morning and go off quickly in the Australian sun. Ours are moulded at 2.5mm, so you get a stiffer shield that holds its shape through outback corrugations and coastal humidity, with far less rattle.
The slim profile follows the roofline and door frame of your 76, 78 or 79 Series, without the bulk of a clip-on. UV-resistant materials keep the finish looking the same instead of yellowing or warping after a summer or two.
The 4-door set covers all four doors, so you're not chasing a rear pair separately. The 2-door set covers both front doors of the Troop Carrier and Single Cab. The automotive-grade adhesive tape is already on the shield. Clean, peel, press and you're done. No drilling, no brackets, no specialist tools.
Built for Australian conditions.
2.5MM CONSTRUCTION
At 2.5mm these are much thicker than the 1.5mm standard, so you get less flex, less rattle and less chance of a crack on rough tracks or in the cold.
UV-RESISTANT FINISH
Moulded from UV-resistant acrylic that resists fading, yellowing and warping, so the slim profile still looks factory after a few Australian summers.
FULL SET INCLUDED
The 4-door set has front and rear shields, so you cover all four doors in one buy. The 2-door set has both front shields.
Vehicle fitment.
Installation overview.
CLEAN THE SURFACE
Wipe the door frame where the shield sits and let it dry all the way. Moisture or dust under the tape will cost you adhesion.
PEEL & POSITION
Peel back a section of the tape backing, hold the shield against the door frame and press firmly along its full length as you pull the rest of the tape.
CURE TIME
Once it's on, run firm even pressure along the whole visor edge. Don't wash the vehicle for 48 hours. The adhesive needs that time to reach full bond strength.
What owners Say.
"Best weather shields i have had yet (have had a few), nice tint, quality materials and super easy fitment with quality bonding tape."
"Perfect fit and looks amazing. Have also bought the new ram snorkel head - have also fitted this and very happy with both products"
"Fast shipping Great price And appear appears to be very good quality and very good fit Thanking you kindly"