Kostenloser Versand für alle australischen Bestellungen über 150 $
Home · Baja Designs · S1 Flush Mount Auxiliary Light Pod
S1 Weiße Unterputz-Zusatzleuchte (Pod) - Universal
s1-white-flush-mount-auxiliary-light-pod-universal cardS1 White Flush Mount Auxiliary Light Pod - UniversalS1 White Flush Mount Auxiliary Light Pod - UniversalS1 White Flush Mount Auxiliary Light Pod - UniversalS1 White Flush Mount Auxiliary Light Pod - Universal
PVS Automotive

S1 Flush Mount Auxiliary Light Pod White LED, universal fit

You get serious off-road light out of a 2.1-inch cube. The S1 sits flush in your panel, and all you cut is one 2.5-inch hole.

New
$159 AUDSale
Was

We bring this one in to order, so we check the current price, stock and lead time with the manufacturer and come back to you before anything is paid.

Free Delivery, Australia-wide.Dispatched from our Sydney warehouse.12-Month Australian Warranty und 30 Tage Rückgaberecht.Unterstützt von PVS Automotive, Support aus Sydney. Steuerlich absetzbar für Unternehmen. GST erstattungsfähig, wenn du registriert bist.Oft voll als Betriebsausgabe absetzbar. Sprich mit deiner Steuerberatung. Australian Owned CertifiedAustralisches Eigentum, australisch geführt.Australian Owned Certified · AO 08314

Ask about this product

S1 Weiße Unterputz-Zusatzleuchte (Pod) - Universal

Year, model and series, if it changes the answer.
Prefer email? Write to info@pvsautomotive.com.au.

Thanks, your question is with us.
Key Specs
Type LED Auxiliary Light Pod
Housing Size 2.1 in. length x 2.1 in. width x 2.1 in. height
Colour Temperature 5000K Daylight
Mount Style Flush mount, 2.5 in. hole saw cut-out
12-Month Australian Warranty
Flush Mount Install Needs Just a 2.5 Inch Hole Saw
Waterproof and Submersible MoistureBlock Sealed Against the Elements
30-Day Easy Returns
01
Design Notes

Big light output, small package.

The S1 was built from the ground up to out-throw lights far bigger than itself. A specialised reflector and LED pairing push more usable light onto the road or the worksite than you'd expect from a 2.1-inch pod.

The mounting is what separates the S1 Flush Mount from a conventional pod. One 2.5-inch hole saw gives you a clean flush opening, so your build looks factory with no brackets or backing plates to work around.

Pick Spot, Wide Cornering or Work/Scene. You can carve up a dark two-track with one, or flood a campsite with daylight-balanced light that's easy on your eyes.

02

Built to Baja Designs standards.

Every S1 carries the full run of Baja Designs technology and backing that their professional racing heritage demands.
Feature01

COPPERDRVE EFFICIENCY

CopperDrive runs every LED at 100 per cent output. You get the full brightness and consistency each diode can give, with nothing held back.

Feature02

5000K DAYLIGHT OUTPUT

5000K sits close to natural daylight, so colours read true on the trail. Long night runs wear you down less.

Feature03

MOISTUREBLOCK SEALING

Waterproof, rain-proof and submersible construction keeps moisture out of the optics and electronics. It holds up in the harshest conditions.

03

Installation overview.

You can fit the S1 Flush Mount yourself. Work through these steps for a clean result.
Basic tools required. No special brackets needed.
01

CHOOSE YOUR LOCATION

Pick a flat or gently curved panel with enough clearance behind it for the S1 body and the wiring.

02

CUT THE HOLE

Cut one clean aperture at your mark with a 2.5-inch hole saw. Deburr it and clean up any sharp edges.

03

FIT THE S1

Drop the S1 pod into the hole and secure it with the included hardware. The flush design sits neatly in the panel surface.

04

WIRE AND TEST

Connect the harness to a suitable power source, check your polarity, then test the light before you finish the cable routing or put the trim back.