OnX6 Arc Dual Control LED Light Bar 30 inch, independent inner/outer zone control
The OnX6 Arc Dual Control splits a single 30-inch bar into inner and outer zones, each on its own switch, so you can run white or amber light exactly when you need it. One bar, two circuits, your call from the cabin.
Thanks, your enquiry is with us. We will confirm current price, stock and lead time with the manufacturer and email you back. We have emailed a copy to . Reply to that email to add anything.
Item code: 523003DC
Australisches Eigentum, australisch geführt.Australian Owned Certified · AO 08314One bar, two worlds.
Most light bars lock you into a single output mode. The OnX6 Arc Dual Control splits the bar into inner and outer sections, each with its own power cord and switch. You get white light when you need maximum visibility and amber when conditions call for it, all from one clean installation.
Baja Designs builds the OnX6 around its CopperDrive technology, which drives every LED at 100 per cent power rather than stepping down current to protect lesser components. Add ClearView optics that put light precisely where you need it and 5000K daylight colour to cut driver fatigue on long nights, and you've got a bar that earns its place on the roof or bar.
Every OnX6 ships with Baja Designs' industry-first 30-Day Satisfaction Guarantee backed by a Limited Lifetime Warranty. You can replace lenses and optics yourself through the uService programme, so you can service the bar in the field instead of sending it back. The wiring harness isn't included, order part number 640119 separately.
Built-in advantages that set it apart.
DUAL CONTROL
Two separate power cords and switches let you run the inner and outer LED sections independently, so you get white and amber output from the one bar with no compromise.
COPPERDRIVE
Every LED runs at 100 per cent power, never throttled back to protect cheaper electronics. That means maximum, consistent output across the full life of the bar.
CLEARVIEW OPTICS
Baja Designs' ClearView system directs all available light exactly where you need it, cutting scatter and putting usable illumination on the road or trail ahead.
Installation overview.
SELECT YOUR MOUNT
Choose a roof rack, bull bar top rail or dedicated bracket that suits the 30-inch span and gives you a solid, vibration-resistant base.
ROUTE TWO HARNESSES
The dual control setup needs two separate wiring runs. Order harness part 640119 (sold separately) and plan your cable path for both the inner and outer circuit before you drill or fasten anything.
CONNECT AND SWITCH
Wire each harness to its own switch in the cabin. Label or position the switches clearly so you can pick white, amber or both without taking your eyes off the road.
CONFIRM AIM
With the bar energised, check the beam aim at a flat surface about 7 metres ahead and adjust the mounting angle before you fully torque all fasteners.
