OnX6 10" Straight Racer Edition LED Light Bar Racer Spot beam, clear lens
The OnX6 Racer Edition is a 10-inch straight LED light bar built for high-speed night driving. You get a tight, far-reaching spot beam and a Limited Lifetime Warranty from Baja Designs.
Thanks, your enquiry is with us. We will confirm current price, stock and lead time with the manufacturer and email you back. We have emailed a copy to . Reply to that email to add anything.
Item code: 411702
Australisches Eigentum, australisch geführt.Australian Owned Certified · AO 08314Built for speed, built to last.
The OnX6 Racer Edition is built for high-speed operation above 110 MPH. Up there, a tight, far-reaching spot beam is what lets you read the road instead of reacting too late. The 5000K daylight colour temperature keeps the output natural, so your eyes stay fresh over a long stint behind the wheel.
Every OnX6 Racer Edition ships with Baja Designs' uService system. That means the lenses and optics are field-replaceable, not disposable. Add MoistureBlock waterproofing and CopperDrive technology, which runs every LED at 100 per cent of its rated drive current, and you've got a light bar that performs as hard as you push it.
Why the OnX6 Racer Edition stands apart.
COPPERDRIVE
Every LED runs at 100 per cent of its rated current, so you get maximum output and consistency from each diode.
5000K DAYLIGHT
Natural daylight colour temperature cuts eye strain and fatigue on high-speed or long night drives.
MOISTUREBLOCK
Fully waterproof, rain-proof and submersible construction keeps the internals protected no matter what the trail or track throws at it.
Installation overview.
CHOOSE YOUR MOUNT POSITION
Pick a spot that keeps the beam path clear of the bonnet line and any roof-rack crossbars. Bull bars and windscreen-top mounts are the most common positions for a 10-inch bar.
SECURE THE BRACKET
Use the supplied hardware to fit the mounting brackets. Torque every fastener firmly and add thread-locker so corrugations and rough terrain don't shake it loose.
ROUTE AND CONNECT WIRING
Run the wiring loom clear of heat sources and sharp edges. Connect it through a relay harness and an in-line fuse to protect the light and your vehicle's electrical system.
