LED Rock Light Kit Amber, universal fit, turn-key wiring included
This kit puts 400 lumens of amber light at each corner of your 4WD with wiring pre-cut to length. No relays to pin, no leads to measure, just bolt it in and connect to a 12V source.
Thanks, your enquiry is with us. We will confirm current price, stock and lead time with the manufacturer and email you back. We have emailed a copy to . Reply to that email to add anything.
Item code: 447056
Australisches Eigentum, australisch geführt.Australian Owned Certified · AO 08314Amber light, zero headache.
Most rock light kits leave you hunting for the right wire lengths, sourcing relays and pinning connectors at the side of the track. Baja Designs cuts all of that out for you. Every lead in this kit is pre-cut to reach all four corners of a small to mid-sized vehicle, with enough slack for you to route the wiring the way you want.
The amber output is smooth and wide, with a 180 degree optic that floods wheel wells, rockers and underbody panels evenly. The lights are fully waterproof, so you can mount them virtually anywhere on the underside of your vehicle. All you need is a 12V source.
These lights generate heat during extended use. Let them cool before you handle them during installation or servicing.
What comes in the kit.
TURN-KEY WIRING
Pre-cut leads sized to reach all four corners of a small to mid-sized vehicle, with extra slack so you can route them your way.
400 LUMENS PER LIGHT
Four individual LED rock lights, each producing 400 lumens of smooth, bright amber output.
180° OPTIC
A wide-spread optic lights up wheel wells and underbody panels evenly, with no hot spots.
Installation overview.
PLAN YOUR ROUTE
Lay the pre-cut leads along the underside of your vehicle from your power source to each corner to check the routing before you drill.
MOUNT THE LIGHTS
Secure each rock light where you want it on the wheel well or rocker. The waterproof housing means you can mount it in exposed positions.
RUN THE WIRING
Route each pre-cut lead back to your 12V power source, keeping the loom clear of the exhaust and moving components.
CONNECT POWER
Connect to a switched 12V source. You won't need to pin a relay as the kit comes ready to connect.
