X-Security Cover Locks down your dash cam's SD card and cables
Anyone with five minutes alone in your vehicle can pull the SD card or unplug your dash cam. The X-Security Cover locks the card slot and both cables in place, so your footage stays put in fleet or shared vehicles.
or 4 interest-free payments of $17.25 with Shop Pay & Afterpay
Item code: IRD-X-Series-SecCover
Australisches Eigentum, australisch geführt.Australian Owned Certified · AO 08314Why fleet vehicles need this.
A dash cam only helps if the footage is still there when you need it. In a shared or fleet vehicle, the SD card is an easy target for anyone wanting to remove evidence of an incident. The X-Security Cover puts a physical barrier between the card slot and unwanted hands, and locks both the power and rear camera cables so the unit can't be unplugged.
The cover installs with 3M adhesive tape and mounting screws, giving you a firm, tidy fit that doesn't interfere with normal dash cam operation. Left and right side cable ports keep your routing neat, and spare 3M tape is included so you've got a fresh bond whenever you need to remount.
Built to deter.
SD CARD PROTECTION
A dedicated slot cover blocks physical access to the microSD card, keeping your recorded footage exactly where it should be.
CABLE LOCK
Secures both the power cable and rear camera cable so they can't be unplugged, keeping your camera live whenever the vehicle is in use.
DUAL INSTALL METHOD
Combines 3M adhesive tape with screw fasteners for a hold that's strong and looks clean on your windscreen or mounting point.
WIDE X-SERIES FIT
Suits the IROAD X-series range including the X10, X10-PRO, X11, X11-PRO and X30, so the same cover protects most current IROAD recorders.
Installation overview.
POSITION BOTTOM COVER
Attach the bottom cover to your mounted IROAD X-series dash cam using the 3M adhesive tape, aligning the side cable ports with your existing cable run.
ROUTE AND LOCK CABLES
Feed the power and rear camera cables through the left or right side ports, then secure them with the mounting screws and the included Allen wrench.
FIT TOP COVER AND SD SLOT COVER
Clip the top cover into position and fit the SD card slot cover. Use the spare 3M tape if you need a fresh adhesive bond.