Thread Adaptor M10 x 1.5mm Aero Series gear knob fitment component
A mismatched thread means a loose gear knob and a rattle you'll hear every drive. This M10 x 1.5mm adaptor bridges your shifter and your new Aero Series component, so the thread pitch is right from the start.
or 4 interest-free payments of $4.75 with Shop Pay & Afterpay
Item code: THREAD-APT-M10X1.5-RED
Australisches Eigentum, australisch geführt.Australian Owned Certified · AO 08314The part that makes the fit.
Aftermarket gear knobs and hub kits are only as good as the connection they rely on. A mismatched thread means a loose fit, a rattle, or a fitment that won't work at all. This M10 x 1.5mm adaptor bridges the gap between your existing shifter and your new Aero Series component, so the thread pitch is right from the start.
Part of the Aero Series range, it's designed to complement Aero Series steering wheel and hub components without adding bulk to your setup. Nothing cut, nothing modified, no guesswork. Just a precise, compact adaptor that does its job quietly and correctly.
Designed for precision fitment.
M10 x 1.5MM THREAD
The precise thread specification gives you a secure, rattle-free connection to your gear knob or hub kit.
MANUAL TRANSMISSION
Suited to manual transmission vehicles only. It won't work with an automatic transmission setup.
AERO SERIES COMPATIBLE
Built as part of the Aero Series range, it matches Aero Series gear knobs and hub components for a consistent fitment.
Installation overview.
CONFIRM FITMENT
Check your vehicle's shifter uses an M10 x 1.5mm thread and is a manual transmission before you order.
REMOVE EXISTING KNOB
Unscrew your current gear knob from the shifter shaft following your vehicle's standard procedure.
THREAD THE ADAPTOR
Thread the M10 x 1.5mm adaptor onto the shifter shaft and make sure it seats securely with no play.
FIT YOUR GEAR KNOB
Install your Aero Series gear knob onto the adaptor and tighten to a firm, rattle-free finish.
