105 Series Cruise Control Retention Module Wired-in module for the older 3-wire cruise control stalk
Fit an aftermarket wheel to a 105 Series and the factory cruise control circuit breaks at the column connector. This module wires into the cruise circuit to keep cruise working, and you only need it if your LandCruiser has the older-style 3-wire cruise control stalk.
or 4 interest-free payments of $74.75 with Shop Pay & Afterpay
Item code: 105-CRUISE-RETENTION-MODULE
Australisches Eigentum, australisch geführt.Australian Owned Certified · AO 08314Why this module exists.
When you fit an aftermarket steering wheel to your 105 Series LandCruiser, the factory cruise control circuit breaks at the column connector. Only vehicles with the older-style 3-wire cruise control stalk are affected, so this module is sold separately from the steering wheel upgrade kit.
This module restores the factory cruise control signal so cruise keeps working after the wheel swap. It's wired in, not plug and play: you join the three wires into the cruise control wiring at the column during the steering wheel install.
Simple solution, clean result.
FACTORY FUNCTION RETAINED
Keeps your OEM cruise control working in full after you fit an aftermarket steering wheel adaptor.
WIRED-IN INSTALL
You join the three wires into the cruise control wiring at the steering column. It's not plug and play, so allow time for wiring work as part of the install.
COMPACT AND HIDDEN
The small module tucks behind the steering column trim for a tidy install, out of sight.
Vehicle fitment.
Installation overview.
ACCESS THE COLUMN WIRING
Remove the column trim to reach the cruise control wiring as part of your steering wheel install.
WIRE THE MODULE IN
Join the module's three wires into the cruise control wiring, following the supplied installation guide.
SECURE AND TUCK
Route the module neatly behind the column trim, then refit your steering wheel adaptor and wheel as normal.
