4K Lens Backup Camera For SBD 10.8″ and 14.5″ radios, 2007 to 2016 R35 GT-R
A generic backup camera rarely plays nicely with the Speed by Design radio in your 2007 to 2016 R35 GT-R. This 4K lens camera connects straight into the camera input on the back of your SBD 10.8″ or 14.5″ head unit, so you get a clean image with nothing else in the chain.
or 4 interest-free payments of $42.25 with Shop Pay & Afterpay
Item code: NISSAN-GTR-R35-4K-REV-CAMERA
Australian Owned and Operated.Australian Owned Certified · AO 08314Purpose-built rear vision for your GT-R.
The Speed by Design radio fitted to your 2007 to 2016 R35 GT-R is a precision piece of kit, and a generic backup camera rarely plays nicely with it. Mismatched connectors, degraded image quality and fiddly workarounds are what you run into when you try to retrofit an off-the-shelf camera.
This 4K lens camera is built specifically around the SBD 10.8″ and 14.5″ units. It connects directly to the dedicated camera input on the back of your head unit, so the image comes through cleanly at full resolution with no adapters or signal converters in the chain.
This camera fits 2007 to 2016 R35 GT-R models only. If you are not sure whether your vehicle or radio falls within this range, get in touch with the PVS Automotive team before you order.
What makes it the right fit.
4K RESOLUTION
Sharp, detailed rear vision so you can park and manoeuvre your R35 with confidence, even in low light.
PLUG-AND-PLAY CONNECTION
Connects directly to the camera input port on the rear of your SBD 10.8″ or 14.5″ head unit. No adapters, no signal converters, no workarounds.
CLEAN INSTALL
Mounts and wires neatly, so your interior stays tidy and your existing wiring harness stays intact.
Vehicle fitment.
Installation overview.
MOUNT THE CAMERA
Position and mount the camera at the rear of your vehicle wherever you prefer.
RUN THE CABLE
Route the camera cable neatly through to your head unit, clear of any moving parts or heat sources.
CONNECT TO SBD INPUT
Plug the camera connector directly into the dedicated camera input port on the back of your SBD 10.8″ or 14.5″ head unit. No adapters needed.
TEST THE IMAGE
Engage reverse to check the 4K feed displays correctly on your SBD radio screen.